A little help.

 

Bronze Member
Username: Kungpow

Duluth, Minnesota USA

Post Number: 26
Registered: Mar-06
First off this ins't my first install. Ok I put everything in my dad's car. Then when it is running there is a hissing noise. I was under the impression that the problem is a bad ground, so I unscrewed all of them and put them back. Still noise. Then I pulled the power wires away from the speaker lines on the amp still noise. So If anyone could help out I would apreciate it.
 

Gold Member
Username: Goatin

Ohio U.S.A

Post Number: 1103
Registered: Jan-06
Are your RCA's and main power cord at least 2' apart?
 

Silver Member
Username: Highstone

Post Number: 189
Registered: Mar-06
yeah.. try to keep your RCA as far as possible from the power cable because RCAs tend to catch the noise that is given by power cable and the noise is amplified later and ends up in ur speakers...
 

Bronze Member
Username: Kungpow

Duluth, Minnesota USA

Post Number: 27
Registered: Mar-06
They cross at a 90 so should I try to stick something between them. Otherwise they never get close to each other.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us