Bass test?

 

Gold Member
Username: Lexuscoop

Phx, Arizona

Post Number: 1361
Registered: Dec-05
does anyone know of a song that tests every lvl of frequensy? (sub frequensy) because i want to see how my subs do on all Hz, you know? idc if the song doesn't have a beat, or a rythem, i just want to know what my subs sound like on all sub frequensy's

Thanks
 

Gold Member
Username: Young_james

Canada

Post Number: 1286
Registered: Sep-05
go to ROE, downloads and pick your choice......or go out and buy bass mechanick
 

Gold Member
Username: Lexuscoop

Phx, Arizona

Post Number: 1362
Registered: Dec-05
ROE? idk what that is
 

Silver Member
Username: Nnnnick_b

Weddington, Nc Usa

Post Number: 612
Registered: Jan-05
Realm of Excursion
www.realmofexcursion.com
 

Gold Member
Username: Young_james

Canada

Post Number: 1287
Registered: Sep-05
realm of excursion

http://www.realmofexcursion.com/
 

Gold Member
Username: Lexuscoop

Phx, Arizona

Post Number: 1363
Registered: Dec-05
thanks guys
 

Gold Member
Username: Young_james

Canada

Post Number: 1291
Registered: Sep-05
no prob
 

Silver Member
Username: Winterfreshpimp

Chisago, MN America

Post Number: 172
Registered: Mar-06
listen to track 3 on t.i.'s cd its hits alot of different notes and its a good song
 

Silver Member
Username: Jkidder

Spring hill, Florida Usa

Post Number: 101
Registered: Nov-05
can test tones hurt ur sub or amp or anything in any way? cuz i want to test mah subs frequency and see the xmax.. which tones should i download? also wat vloume should i play these tones at?

heres a few..

35Hz to 50Hz Sine Sweep
35Hz to 1Hz Sine Sweep
60Hz to 70Hz Sine Sweep
60Hz to 45Hz Sine Sweep
100Hz to 20Hz Sine Sweep
250Hz to 20Hz Sine Sweep
22kHz to 1Hz, 1Hz to 22kHz
20Hz to 120Hz Slow Warble
40Hz to 80Hz Slow Warble
30Hz to 50Hz Medium Warble

which should i use?
 

Silver Member
Username: Fiber

Post Number: 179
Registered: Mar-06
well if you want to test almost all of them fo 250Hz to 20Hz 20hz is as low as the human ear can hear and 250 sounds like a high pitched toot...
 

Gold Member
Username: Basshead86

Slowcala, FL The one that...

Post Number: 2936
Registered: Aug-05
they can only hurt if you turn it up too loud and the sub bottoms out, or the amp clips the signal.:-)
 

Silver Member
Username: Jkidder

Spring hill, Florida Usa

Post Number: 104
Registered: Nov-05
so if i use that one jus keep the volume around 15-20?
 

Gold Member
Username: Tdeaton1021

Near Tampa, Florida USA

Post Number: 2663
Registered: Sep-04
if your amps are tuned correctly you can play any test tone at full volume (volume you tuned at) as long as it is recorded at 0db. which ROE has. they also have -3db and +3db if i remember right... but you'll want a 0db tone. when i had my avalanche i would play a 20hz tone and my door panels would shake bout half an inch. also make note that if your box is ported yoru SSF must be set right. you dont want to over excurt your sub.
 

Bronze Member
Username: Blk02ss

Post Number: 50
Registered: Feb-06
that all depends on the HU, and how much your power your giving your subs.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us