I bought 2 12" Comp VX for a kx2500.1 amp. will these subs blow?

 

Bronze Member
Username: Don_beeski

Bourbonnais, IL Kankakee

Post Number: 37
Registered: Apr-06
I've heard the amp is to much power. Some people say its alright. I need advice on this matter.
 

Silver Member
Username: Dustin3

Tigard, Or U.S.

Post Number: 899
Registered: Oct-05
lol, havent you already posted this?? just hook it up to 4 ohms, to give each sub 750 watts rms. wait, do u have a zx2500.1 or kx2500.1?? each put out diff power at ohms.

if you do have the kx2500.1, hook up to 4 ohms (if you have DVC 4 ohm subs) and you'll be set
 

New member
Username: Simba_08

Entiat

Post Number: 2
Registered: Apr-06
if the amp is more then the subs all u have to is set the amp with the subs have a song playing and if it sound like it is over working the subs turn the gane down untill it sounds like itnot over working them and ajust the valume on the stero from hi to low
 

Silver Member
Username: Dustin3

Tigard, Or U.S.

Post Number: 903
Registered: Oct-05
i wouldnt recommend that^^.

you cant hear if the subs are overworking, until you find that out, they'll blow :-(
 

Gold Member
Username: Rovin

Trinidad & T...

Post Number: 7465
Registered: Jul-05
kicker kx2500 does 2500wrms @ 2ohms

if u bought 2ohms dvc CVX then ur fine .....
 

Gold Member
Username: Rovin

Trinidad & T...

Post Number: 7466
Registered: Jul-05
kicker kx2500 does 2500wrms @ 2ohms

if u bought (2) 2ohms dvc CVX subs then ur fine .....
 

Bronze Member
Username: Don_beeski

Bourbonnais, IL Kankakee

Post Number: 38
Registered: Apr-06
Thanks. I just needed more input on the subject.
 

Bronze Member
Username: Don_beeski

Bourbonnais, IL Kankakee

Post Number: 39
Registered: Apr-06
no the subs are 4 ohm DVC
 

Gold Member
Username: Chaunb3400

Huntsville, Alabama U.S.

Post Number: 6603
Registered: Jul-05
can u switch 2 the 2ohm version
 

Bronze Member
Username: Don_beeski

Bourbonnais, IL Kankakee

Post Number: 41
Registered: Apr-06
No I have the 4ohm version. I wish I could.
 

Gold Member
Username: Chaunb3400

Huntsville, Alabama U.S.

Post Number: 6604
Registered: Jul-05
ok, but u havent bought the amp yet right???
 

Bronze Member
Username: Don_beeski

Bourbonnais, IL Kankakee

Post Number: 42
Registered: Apr-06
The amp will be coming on the 26th.
 

Gold Member
Username: Chaunb3400

Huntsville, Alabama U.S.

Post Number: 6605
Registered: Jul-05
oh sh!t, it will work, but not to there full poteintial
 

Silver Member
Username: Dustin3

Tigard, Or U.S.

Post Number: 907
Registered: Oct-05
i dont think you want to put 2500 watts into 2 750 rms subs rovin. the amp does 1500 @ 4 ohms, so wouldnt it make more snese to wire to 4 ohms and get 750 per sub, which is what their rated at??
 

Silver Member
Username: Dustin3

Tigard, Or U.S.

Post Number: 908
Registered: Oct-05
why would you want to put 2500 wats into 2 750 rms subs??
 

Bronze Member
Username: Don_beeski

Bourbonnais, IL Kankakee

Post Number: 43
Registered: Apr-06
Thats what i was thinking bassman3. I didn't want to run the full 1500 to each sub. Will 750 per sub sound good. What does rms mean?
 

Gold Member
Username: Chaunb3400

Huntsville, Alabama U.S.

Post Number: 6606
Registered: Jul-05
the amp does 1250@4 ohms, personally i would give them around 1000rms a piece
 

Silver Member
Username: Dustin3

Tigard, Or U.S.

Post Number: 909
Registered: Oct-05
Oh WTF. this site when i was looking at the specs gave me the wrong info and said 1500 @ 4 ohms.

if its rated at 2 ohms to be 2500 that means around 1250 each sub, and that to me sounds like a lil much for a sub thats 750 rms.
 

Gold Member
Username: Rovin

Trinidad & T...

Post Number: 7469
Registered: Jul-05
k - maybe i was thinking those subs r 100wrms each (too many damn threads opened same time-lol )

amp
http://www.onlinecarstereo.com/CarAudio/ProductDetail.aspx?ProductID=14825

sub
http://www.onlinecarstereo.com/CarAudio/ProductDetail.aspx?ProductID=16855

sub is rated 750 each

so u said u bought 4 ohms dvc version ?

man u should cancel that amp order ASAP !
maybe get a PPI DCX 1500 Or an amp that does around 2000wrms @ 1ohm ........

 

Bronze Member
Username: Don_beeski

Bourbonnais, IL Kankakee

Post Number: 44
Registered: Apr-06
1250 for 4 ohm?
 

Bronze Member
Username: Don_beeski

Bourbonnais, IL Kankakee

Post Number: 45
Registered: Apr-06
the amp will be at my house on the 26th. What should i do since I already have both items? 1250 is 2 much power for a 1500 watt sub? i know its 750 rms. what if you went over that?
 

Silver Member
Username: Dustin3

Tigard, Or U.S.

Post Number: 911
Registered: Oct-05
thats your best bet, but that giving each sub around 650 rms. That isnt much of a diff though, and i know that they underrate their amps so your sub will prolly be gettin 700 each. Not to shabby, but i would rather put a lil more, than to have them underpowered.

either way, they will sound very good. e-mail them and see if you can return. if not, it not a huge loss.
 

Gold Member
Username: Rovin

Trinidad & T...

Post Number: 7471
Registered: Jul-05
well u either keep both subs & cancel amp order

or get amp cancel sub order

what i would do is KEEP amp , cancel subs & instead buy 2 12s RE SX subs www.reaudio.com ...
 

Bronze Member
Username: Don_beeski

Bourbonnais, IL Kankakee

Post Number: 46
Registered: Apr-06
i bought both items from 2 different dealers on ebay. I was thinking the amp would come out to be 750 rms per sub. I didn't want to over power or under. What subs would go good with this amp? Or is it alright with the 2 that i have. I heard under power will hurt the amp.
 

Gold Member
Username: Rovin

Trinidad & T...

Post Number: 7472
Registered: Jul-05
"""What subs would go good with this amp?"""



i told u in my last post ...
 

Silver Member
Username: Juliob

Santo DomingoDominican Re...

Post Number: 485
Registered: Dec-05
even with the same subs, problem is that you don't have DVC 2ohm, you could give them 1000wrms a piece and turn the gain down a lil bit so they won't blow, for me i would sell the subs and get some better or trade it with someone and get dual 2 ohm
 

Bronze Member
Username: Don_beeski

Bourbonnais, IL Kankakee

Post Number: 47
Registered: Apr-06
So if I had dvc 2 ohm it would be alot better for me?
 

Silver Member
Username: Juliob

Santo DomingoDominican Re...

Post Number: 491
Registered: Dec-05
hell yeah! your amp puts out 2500w rms at 2 ohms, you give them 1000w rms, but you need to control the gain, don't put it too high.
 

Bronze Member
Username: Don_beeski

Bourbonnais, IL Kankakee

Post Number: 48
Registered: Apr-06
well i'll see If i can trade for 2 ohm dvc. Hopefully I can.
 

Silver Member
Username: Dustin3

Tigard, Or U.S.

Post Number: 914
Registered: Oct-05
thats alot of watts for one of those subs. you will be overpowering them in my opinion, and could potentially lead to blowing them.
 

Silver Member
Username: Dustin3

Tigard, Or U.S.

Post Number: 915
Registered: Oct-05
putting 1250 watts into a 750 rms sub. i like those subs, and i would get a diff amp, or wire it to 2 ohms see how you like it, and then if you dont like it get a diff amp. i would hook up and see hw you like it first
 

Silver Member
Username: Juliob

Santo DomingoDominican Re...

Post Number: 497
Registered: Dec-05
bassman, he must turn the gain down, it's better for him to trade subs cuz is cheaper, in fact, is free, if he gives 900-1000w to each sub they will be fine, i don't think he's going to drive with 2000w rms inside the trunk without getting a police ticket, lol!!!!!!!!
 

Gold Member
Username: Rovin

Trinidad & T...

Post Number: 7477
Registered: Jul-05
Brandon W

either way u look @ it - u got ur self a BAD combo ,like i said above get rid of 1 or the other or better yet - BOTH ! .....
 

Silver Member
Username: Juliob

Santo DomingoDominican Re...

Post Number: 501
Registered: Dec-05
why these guys never talk with this forum before buying, two advices:

1- You get what you pay for (most of the cases jejeje)
2- DO IT RIGHT THE FIRST TIME
 

Bronze Member
Username: Don_beeski

Bourbonnais, IL Kankakee

Post Number: 49
Registered: Apr-06
I got the 2 ohm dvc subs coming. So all I should do is turn the gain down to 1000 or 900?
 

Silver Member
Username: Dustin3

Tigard, Or U.S.

Post Number: 917
Registered: Oct-05
you dont turn the gain down to 900 or 1000.there is no certin # that you turn it to.you need to match the voltage output of ur HU with ur gain, and then turn it a lil below that
 

Silver Member
Username: Dustin3

Tigard, Or U.S.

Post Number: 918
Registered: Oct-05
you dont turn the gain for what watts you want the amp to put out.
 

Bronze Member
Username: Don_beeski

Bourbonnais, IL Kankakee

Post Number: 50
Registered: Apr-06
what does this mean? 1500 x 1 @ 4 ohms, from 20-200 HZ, 14.4Vdc, 1% THD.
 

Silver Member
Username: Dustin3

Tigard, Or U.S.

Post Number: 938
Registered: Oct-05
it does 1500 watts in bridged mode @ 14.4 volts (which is usually what the rating are at. THD is the signal to noise ratio or harmonic distortion and anything below 1 is fine.

what amp is that?
 

Silver Member
Username: Dustin3

Tigard, Or U.S.

Post Number: 939
Registered: Oct-05
signal to noise ratio isnt the same as THD, but you want that number to be above 80
 

Bronze Member
Username: Don_beeski

Bourbonnais, IL Kankakee

Post Number: 63
Registered: Apr-06
This is the kx2500.1 birth sheet from the actual manual.
 

Silver Member
Username: Dustin3

Tigard, Or U.S.

Post Number: 940
Registered: Oct-05
ohh. just wire ur subs to 4 ohms with those cvx's. dont worry about it anymore, you have the DVC 4 ohm subs, wire it to 4 ohms and give each sub 750 or more watts since the amp is overrated. Dont borry bout the #s like THD and stuff, it wont be a noticiable diff. :-)
 

Bronze Member
Username: Don_beeski

Bourbonnais, IL Kankakee

Post Number: 65
Registered: Apr-06
How do you bridge an amp?
 

Silver Member
Username: Dustin3

Tigard, Or U.S.

Post Number: 946
Registered: Oct-05
it will say on the amp "bridged" or it should say and it will point to the + and - terminal you need to hook it up at. so you basically take the speaker wire, put it in the bridged terminals and then connect ur subs or vis versa
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us