New member Username: Themax99se
Post Number: 6
Registered: Apr-06
|
Posted on If one coil doesnt work, is it safe to use the other coil? Should it still be wired together?
Its a 10" Type R 2ohm DVC. Thanks. |
Silver Member Username: Scott_debaker
Pittsburgh,
P.A.
U.S.A.
Post Number: 204
Registered: Feb-06
|
Posted on u gota wire both coils 2geather or it will heat up an then blow |
New member Username: Themax99se
Post Number: 7
Registered: Apr-06
|
Posted on But what if the other coil doesnt work. How about if you have two DVC subs with a blown coil. Could you wire those coils together?
If only one is wired, what causes it to heat up and blow? |
Gold Member Username: Rovin
Trinidad & T...
Post Number: 7431
Registered: Jul-05
|
Posted on if ur sure 1 coil is def blown - then just use the other coil 4 now cause in time it too may die on u then it will time 2 buy a new sub.... |
New member Username: Themax99se
Post Number: 8
Registered: Apr-06
|
Posted on So hook up a working coil with a blown coil anyways? |
Silver Member Username: Panocha
Post Number: 117
Registered: Jun-05
|
Posted on yeah go for it ive hooked a sub with one coil for like a year and it was fine that was when i dint know about subs and ohms......... |