New member Username: SnowblindaceHarrodsburg, Ky Post Number: 8 Registered: Apr-06 | Hey. my friend needs help. he has a 1200 watt Jbl amp 2 12" 1600 watt jbl subs and a JVC hu. When the head unit gets turned up to a certain volume the amp and subs cut in and out the subs are wired in a dual 4 ohm load. i was wondering if anyone else has had this problem or if you could help me with it. thanks. |
Gold Member Username: TjmutlowPost Number: 1913 Registered: Sep-05 | are those dual 4 ohm or the dual 2ohm subs.(each) |
Bronze Member Username: Car1Post Number: 18 Registered: Apr-06 | i had that problem, i found it was a bad ground... i rewired my hold car and it worked fine! i dnt think its nothing to do with power flow! by i may be wrong. |
New member Username: SnowblindaceHarrodsburg, Ky Post Number: 9 Registered: Apr-06 | they are dual 4 ohm. he checked the ground and it was alright...is there anything else that it could be? |
Gold Member Username: TheelfkeeperStockbridge, GA USA Post Number: 1779 Registered: Feb-05 | it could be a ground problem. usually always a sign of an inadequate electrical system too. |
Gold Member Username: TjmutlowPost Number: 1917 Registered: Sep-05 | if they are dual 4, then the should be hooked up series/paralel, see www.the12volt.com under woofer wiring to make sure it is wired that way. |
Bronze Member Username: Cminus909Post Number: 14 Registered: Aug-04 | Are you using a bass remote??? Reason why i ask is because i had that problem wen i turned the bass remote up and the sub amp would go into protect mode...The Gain on the JBL amp is up to high |