Tube or slot port

 

New member
Username: 30hrtz

Raleigh, Nc U.s.a

Post Number: 7
Registered: Mar-06
it seems like using a 6 in diameter tube for my port for my kicker 15 comps would be a little easier than the slot port as far as adjusting and tuning the box,if it didntsound just right.is the spl the same as long as you use the same port area,slot vs.tube.
 

Gold Member
Username: Rzarector

Coquitlam, Bc Canada

Post Number: 1056
Registered: Dec-04
spl will be the same.. slot port is usually easier IMO because usually you have to get into bends with pvc ports when your trying to tune a box low.. but if you have a spl box tuned high than yeah a pvc port is gonna be easier
 

Gold Member
Username: Rzarector

Coquitlam, Bc Canada

Post Number: 1057
Registered: Dec-04
remember u have to keep the pipe 6" away from the walls so it can flow correctly.. thats another downside
 

New member
Username: 30hrtz

Raleigh, Nc U.s.a

Post Number: 8
Registered: Mar-06
yeah,thats tru thanks for the input mark.
 

Silver Member
Username: Matt12490

Benicia, California USA

Post Number: 699
Registered: May-05
how do you calculate port length with a tube with a bend?
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us