|
Bronze Member Username: MystrePemberville, Ohio USA Post Number: 51 Registered: Sep-05 | OK. I know that I have asked this question before and so has a lot of other people. I just got my subs and I need to know how to wire them. Setup: 2 12" SPL JWS(same as JL Audio W6 V1s) DVC 6 ohm 350w RMS 850w max. 1 JL Audio 500/1. I would like to get the most power out of the amp as possible. Thanks. |
|
Silver Member Username: CtmikeCt. Post Number: 230 Registered: Feb-06 | amps to small for both those subs. can you get another or one bigger amp? |
|
Silver Member Username: GoatinU.S.A Post Number: 746 Registered: Jan-06 | I believe that you can wire them to 1.5ohms if you wire them in series. |
|
Gold Member Username: James1115Ct Post Number: 5578 Registered: Dec-04 | that amp is perfect for those subs. Wire them parellell/parr to a 1.5 ohm load http://mobile.jlaudio.com/support_pages.php?page_id=161 I ran 3- 10w6v1's off of a ppi a600 with 600 watts at 4 ohms and they slammed. |
|
Silver Member Username: CtmikeCt. Post Number: 232 Registered: Feb-06 | james, i thought the 500/1 would give 500wrms at any load, 1.5-4ohms. wouldn't that give each sub only 250wrms, which would be underpowering them? |
|
Gold Member Username: James1115Ct Post Number: 5579 Registered: Dec-04 | those subs are very efficient and will get loud with as little as 150 watts and sound good doing it. Also that amp is underrated a tad and will put out close to 600 watts. |