Bronze Member
Username: Pvduk Post Number: 32 Registered: Feb-06
Posted on
Thursday, April 13, 2006 - 00:34 GMT Hi, Im building a sealed sub box, and was wondering how I should channel the wire out of the box. I was thinking drilling a hole just big enough to squeeze the wire through, then seal with silicone caulk thoroughly. Any suggestions, maybe latex caulk??? Thanks.
Silver Member
Username: Matt12490 Benicia,
California
USA
Post Number: 656 Registered: May-05
Posted on
Thursday, April 13, 2006 - 00:41 GMT that silicone idea will work. or you can just buy a terminal cup thingy..
Bronze Member
Username: Pvduk Post Number: 33 Registered: Feb-06
Posted on
Thursday, April 13, 2006 - 01:39 GMT bumpy
Silver Member
Username: John_wash Nashville,
Tennessee
Post Number: 207 Registered: Dec-05
Posted on
Thursday, April 13, 2006 - 02:04 GMT just buy a good terminal cup
Silver Member
Username: Goatin U.S.A
Post Number: 736 Registered: Jan-06
Posted on
Thursday, April 13, 2006 - 02:17 GMT Agreed ^^ They are like 2-5 $ a piece. If you are desperate I have heard of people drilling holes in their box and runing a bolt through and connect the wire Via 2 bolts to connect the wire. if you do do the silicone idea Make Shure you let it dry before turning on your sub's.