What design box should I build ?


Silver Member
Username: Goatin


Post Number: 720
Registered: Jan-06
I drew up a couple of box's on my CAD program the first was off the top of my head.

The second one I made from playing with the box builder program I am assuming the first one is ~35Hz But the second one is 37Hz acording to that box builder site. either way the outside apperance will be the same and I can still get all my cuts out of 1 4X8' MDF board so I dont care.

I did this one off the top of my head.

This is about what the box design site said.

Total height of both is 17"

Gold Member
Username: Southernrebel

Monroe, Louisiana USA

Post Number: 2688
Registered: Mar-04
in inside mouth of your port really needs to be farther away from a wall than that.

what deminsions do you have to work w/ in your car?

what net cuft and box tuning are you looking for?

Silver Member
Username: Goatin


Post Number: 721
Registered: Jan-06
37.25 W and 17 high is as wide and tall as I can go I want about 1.75-1.6 Cu Ft.
« Previous Thread | Next Thread »


Shop Related Deals


Main Forums

Today's Posts

Forum Help

Follow Us