I have had my 12" IDMAX D2 V3 powered by a Hifonics BX-1000D (1000w rms) for about half a year now. Since I have had it, the sub has been in a horribly designed ported box stuffed in the tiny trunk of a Honda S2000. Well, I have traded the car for a '99 Acura TL, and the trunk is HUGE compared to what I used to have.
I would like to know if someone here could kindly design me a box.
I would like the vented box to be the max size recommended, which I read was 2.80 cu.ft.. I'm not willing to give up the entire trunk for an enclosure, so here are my limits...
(measurements based on viewer facing sub opening) Width=30" Height=15" Depth=15"
I absolutely cannot expand the width or height, but the depth is variable. As much as possible, I would like to keep the depth as short as possible.
Any help is appreciated. I want to do it right this time with the proper measurements. I'm not sure who I'm going to have build the box, and I couldn't find any boxes for sale on the ID site. Thanks a lot!
Nominal Impedance (IMP) 1 / 4 ohms DC Resistance (Re) .95 / 3.8 ohms Resonant Frequency (Fs) 20.3Hz Electrical "Q" (Qes) .424 Mechanical "Q" (Qms) 2.02 Total "Q" (Qts) .35 Equivalent Volume (Vas) 5.71 ft3 One Way Linear (Xmax) 24.6 mm Cone Area (Sd) 545 cm2 Sensitivity (Spl) 88.5 dB RMS Power Handling (Pwr) 200 to 1000 Speaker Displacement .12 ft3
Overall Dia. 12.5" Depth 8.25" Mount Dia. 11.0" Magnet Dia 6.5"