Alpine CDA-7892

 

Bronze Member
Username: Bobha

Post Number: 15
Registered: Feb-06
Hi

This is a question from
http://www.fixya.com/problems-solutions/t102722,p198835/Alpine-CDA-7892-CD-Playe r.aspx
That I can not find a solution for:

I have installed the 7892 in an older BMW with good speakers for all 4 channels. All lights are fine,CD plays, radio plays both with low power and high distortion on all 4 channels, The top of the unit around the output IC area is VERY hot and remains so even with the speakers disconnected. What can the problem be?
 

Gold Member
Username: Illuminator

USA

Post Number: 2801
Registered: Apr-05
Certainly, the output IC might need to be replaced, also check to see if there is a factory amp somewhere in the car.

Additionally, double-checking the wiring is a must.

How long does it take for the unit to heat up?
 

Bronze Member
Username: Bobha

Post Number: 17
Registered: Feb-06
Jexx man,

This q is from www.Fixya.com

It would really be great if you could help out there. There's lots of people there who can really use your help. Anyway I'll try to get back to you on this.

10x
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us