Silver Member Username: GoatinU.S.A Post Number: 641 Registered: Jan-06 | If I wanted to port my subs could I just drill a 3" hole in my box or do I need to make PVC ports |
Gold Member Username: 54danny54Betsy layne, Kentucky..GO... USA duh Post Number: 2119 Registered: Nov-04 | pvc ports...or u could buy pre made aeroports that all u have to do is cut...aeroports are the best |
Gold Member Username: CenusHicksville, Ohio Usa Post Number: 1541 Registered: Jan-05 | LOL you could just "drill a hole" but do you know what that would tune to, probally around 150hz and up range, probally make the sub louder but you'll lose everything in sq. |
Gold Member Username: 54danny54Betsy layne, Kentucky..GO... USA duh Post Number: 2121 Registered: Nov-04 | lol at dustin...thats funyn as heck...but yea man u really do need ports, its not that hard http://www.partsexpress.com/pe/showdetl.cfm?&DID=7&Partnumber=268-350 i have the 4 inch kit of that...it has everything except the pipe glue, it even has instructions thats idiot proof |
Platinum Member Username: GlasswolfWisteria, Lane USA Post Number: 11450 Registered: Dec-03 | no. you don't just drill a hole in a sealed box to port it. ports are tuned based on box volume and diameter/length of port, and a ported box is larger than a sealed box for the same sub. can't make a sealed box ported. not if you want it to work right. |