Amplifier power RMS help..

 

Bronze Member
Username: Highstone

Post Number: 56
Registered: Mar-06
hi i have a audiobahn 4 channel(a6004t)amp hooked to my 4 pioneer speakers. the amp is 600 RMS. my question is.. is the amp always producing 600 RMS even if my speakers require 280 RMS? or is the amp producing only the amount that my speakers require?
 

Gold Member
Username: James1115

Ct

Post Number: 5391
Registered: Dec-04
no at high volumes your amp will be pushing that amount of power. You set your amp input (gain) to match your HU's RCA output at roughly 3/4 volume. That is where you will see the most power out of your amp.
 

Gold Member
Username: Theelfkeeper

Stockbridge, GA USA

Post Number: 1480
Registered: Feb-05
the speaker RMS rating has no affect on the amp's RMS ratings. only the load the speakers present on the amp. the speaker's RMS ratings should be taken into consideration when choosing an amp, so you don't give them more then they can handle, thats it.

« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us