Remote wire problems?

 

New member
Username: Freakfreak

Post Number: 1
Registered: Mar-06
ok, my amp.. i didnt want to pull any wires on my head unit, so i connected the remote to a switch to my Bat. It was a tiny switch,. I just switched the switch with a better, lighted one, (LED) .. anyways,
my amps protection mode keeps comming on. but i waited a day, and it worked just fine, untill i turn it off and when i try to turn it back on it goes back into protection mode. but if i leave it alone for ,, maybe 5 hours, it will work again. Untill i turn it off again..
 

New member
Username: Freakfreak

Post Number: 4
Registered: Mar-06
and yes i checked all my fuses and so on. all my connections are good,. all my wireing is good, no shorts. any ideas?
 

New member
Username: Freakfreak

Post Number: 5
Registered: Mar-06
and yes i checked all my fuses and so on. all my connections are good,. all my wireing is good, no shorts. any ideas?
 

Gold Member
Username: Theelfkeeper

Stockbridge, GA USA

Post Number: 1467
Registered: Feb-05
if you bypass that lighted switch, does it work?? could be something to do with the lighted switch.
 

New member
Username: Freakfreak

Post Number: 6
Registered: Mar-06
nah i tried that too, protection still came on. I had it straight to the batt.

My friend thinks its too much voltage..
but i had it wired up before to a small switch that was straight to the batt.

I have no ideas..

 

New member
Username: Freakfreak

Post Number: 7
Registered: Mar-06
help
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us