|
New member Username: LedzepPost Number: 4 Registered: Nov-05 | does anyone know where i can buy bass blockers that cut from 85hz down? i have a amplified bazooka tube BTA8100 , and its built in crossover cuts at 85hz, yet all i can find in bass blockers to compliment this bass tube only go down to 200hz, which would leave a freq gap between 85hz and 200hz. i found some on ebay, but not impressed with the brand name, sorta generic. got any links that sell 85hz bass blockers ? |
|
Platinum Member Username: GlasswolfWisteria, Lane USA Post Number: 11244 Registered: Dec-03 | get a bass blocker at about 100-120Hz. leave the gap there. the roll off will cover the gap. the XO point isn't a brick wall cut off. It's just the point where the volume starts to diminish from there on down. |
|
New member Username: LedzepPost Number: 8 Registered: Nov-05 | thanks glasswolf. do you know where i can get some middle of the road quality bass blockers at that spec? |
|
Platinum Member Username: GlasswolfWisteria, Lane USA Post Number: 11260 Registered: Dec-03 | FMOD makes RCA level ones you can order from partsexpress.com or try crutchfield.. or just build your own. www.the12volt.com has diagrams for 2nd order high-pass filters. |
|
New member Username: NypdlapdPost Number: 3 Registered: Feb-06 | Crutchfield is a RIPOFF |
|
Platinum Member Username: GlasswolfWisteria, Lane USA Post Number: 11271 Registered: Dec-03 | that they are, but they stock the bass blockers. I don't buy them pre-made, I make my own crossovers, so I really don't have a lot of info on where to buy the prefab jobs online other than there or other craptacular stores like CC and BB |