|
Silver Member Username: PerrydogFlint, Michigan USA Post Number: 130 Registered: Jan-05 | how do i split my remote and groud wire? can i buy a dis. block for the ground? i need 4 remote wires in the end and 4 ground and 4 power wire...let me know thanks |
|
Silver Member Username: Infinity_addictSanta Rosa, California USA Post Number: 232 Registered: Jul-05 | 4 amps?? why so many? just sidestrip and solder extra remote leads from your main remote line. yes, dist blocks work, just make sure your power wires are the appropriate sizes! |
|
Silver Member Username: TheelfkeeperStockbridge, GA USA Post Number: 945 Registered: Feb-05 | actually i've always heard its not good to run more then 2-3 amps off of the HU Rem lead. any more and you need to use a relay or you can burn up the rem lead from the HU. and make sure the main power wire going into the dist block is large enough to handle the current for all 4 amps together. |
|
Silver Member Username: N2audioLawrence, Ks USA Post Number: 481 Registered: Mar-04 | agreed - you should definitely incorporate a relay for 4 turn-ons. |
|
Silver Member Username: SolacedagonyNew Jersey US Post Number: 775 Registered: Oct-04 | Do you have a link to a relay on a website that you can buy or anything like that. I've never actually seen one. |
|
Silver Member Username: TheelfkeeperStockbridge, GA USA Post Number: 953 Registered: Feb-05 | http://www.partsexpress.com/webpage.cfm?&DID=7&WebPage_ID=3 theres several http://www.bcae1.com/ section 36 has an explanation if anyone needs it |