|
Bronze Member Username: GoatinPost Number: 77 Registered: Jan-06 | I have a brand new hifonics 880 watt rms I just got it in the mail today I purchased it last saturday on ebay and after I purchased it I found out that running 1 ch to each coil is not the most efficent way to use this amp so I did plan to send it back and mark it as a newb error.If anyone would like to purchase this amp I can set up a e-bay auction(so that it will all be ligit)I am willing sell it for $140.00 and I will cover sipping and I can have you a tracking # monday evening. SPECS 4 Channel Car amplifier 110 watts x 4 RMS @ 4 ohms 220 watts x 4 RMS @ 2 ohms 440 watts x 2 RMS @ 4 ohms bridged High-Speed MOSFET Output Simpatico Coil Design makes increased accuracy Heat-Sink Design destroys hot air and lets in cold air Fully Adjustable Crossoverss High Pass Filter: 10 Hz - 1.2 kHz Low Pass Filter: 30 Hz - 150 Hz Variable Bass EQ: +18 dB @ 45 Hz Adjustable Input Sensitivity: 200mV - 6V Frequency Response: 10 Hz - 30 kHz Power and Protection LEDs 4-Way amplifier Protection: DC, Short, Thermal, and Overload Silver RCA Line-Outs Dimensions: 16-1/8" L x 10-3/8" W x 2-3/8" H FUSE RATING: 80 AMPS This is the one that I purchased. http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem%26,1%26item%3D803043735 4&sspagename=STRK%3AMEWN%3AIT I opened the box to make shure it was the right amp but it has never been removed from it's plastic or the box.I have a perfect feedback score 100.00% Any questions:g_o_a_t_i_n@yahoo.com only serious buyers please |
|
Bronze Member Username: Bp317Post Number: 33 Registered: Aug-05 | hey, i might be interested in this amp. have you put it on ebay yet? how many watts would it put out bridged at 2 ohms? thanks |
|
Bronze Member Username: GoatinPost Number: 79 Registered: Jan-06 | it runs at 4 ohms bridged to 2 channels at 440watts rms. What subs do you have? |
|
Bronze Member Username: Bp317Post Number: 34 Registered: Aug-05 | 2 mtx8500's. DVC 4ohms and 500 rms |
|
Silver Member Username: BlainewPost Number: 791 Registered: Nov-05 | mitchell i will buy it check your yahoo email |
|
Silver Member Username: BlainewPost Number: 792 Registered: Nov-05 | i just read the part about the ebay.....so disregard the part of the email that says how wil we work this out....i would buy it right now but on ebay it may be a little bit harder b/c i would have to talk my parenst into letting me get it..and theyr not a fan of the loud music hahah ill see what i cann do |
|
Bronze Member Username: GoatinPost Number: 80 Registered: Jan-06 | This should work good for you if you wire it like a 2 ch amp that will give you 440 rms at 4 ohm on each sub I am kinda new to amps but I think it will sound good. |
|
Bronze Member Username: Bp317Post Number: 35 Registered: Aug-05 | yea, it should be better than my power acoustik one i have now too. |
|
Bronze Member Username: GoatinPost Number: 82 Registered: Jan-06 | I was going to post a few pics but I cant get it to work. |
|
Silver Member Username: Dustin3Tigard, Or U.S. Post Number: 353 Registered: Oct-05 | b p, i hope your not planning on running that amp to ur 2 mtx 8500's... |
|
Bronze Member Username: Bp317Post Number: 36 Registered: Aug-05 | why not? im still kinda new to this stuff |
|
Silver Member Username: Dustin3Tigard, Or U.S. Post Number: 358 Registered: Oct-05 | because if you have 2 mtx 8510 subs, each sub had 500 watts rms. and you have two of them which means you have 2 subs that require 500 watts rms each = 1000 watts amp. so you need an amp that puts out 1000 watts. getting that amp you are talking about only puts out 440 watts, which is 220 into each sub. which will work but not gettin the full potential of your subs. |
|
Silver Member Username: Dustin3Tigard, Or U.S. Post Number: 359 Registered: Oct-05 | that is also a 4-channel amp. you would want a mono amp for 2 subs. or 2-channel. |
|
Bronze Member Username: GoatinPost Number: 86 Registered: Jan-06 | it is 440 rms per channel bridged. |
|
Bronze Member Username: Bp317Post Number: 37 Registered: Aug-05 | oh, well by the description it says it does 440 x 2..bridged. i thought that was 440 to each sub? |
|
Silver Member Username: BlainewPost Number: 794 Registered: Nov-05 | it is |
|
Silver Member Username: BlainewPost Number: 796 Registered: Nov-05 | it is but get a mono |
|
Gold Member Username: TjmutlowPost Number: 1267 Registered: Sep-05 | You can not run those subs on that amp bridged, if those are dual 4 ohm then the best you can use it is a an 8 0hm load per bridged side. |
|
Silver Member Username: Dustin3Tigard, Or U.S. Post Number: 374 Registered: Oct-05 | you wont even be getting enough watts to your subs, b p. the rms of those is like 500. 440 is alright but remembeer that, that amp doesnt put out its full watts!! so it will be much less than 440 watts to each sub even if you could do it. the hifonics are most of the time 70-80% overrated. |