|
Bronze Member Username: AfroopuffPost Number: 13 Registered: Jan-06 | Im looking for an amp that will fit this sub, i want to get 2 of these, and then i also want to be able to use this amp to power speakers, i think that would be a 4 channel amp....but not positive.... http://www.onlinecarstereo.com/CarAudio/ProductDetail.aspx?ProductID=14818 also a sub that would fit these, hopefully this could also go with a 4 channel so that i can power both the 2 10's and speakers; http://www.poweracoustik.com/mofo.html (Two 10'') |
|
Silver Member Username: TjmutlowPost Number: 945 Registered: Sep-05 | use a 1 ohm mono amop for subs and a 4 channel for internal speakers |
|
Silver Member Username: N2audioLawrence, Ks USA Post Number: 243 Registered: Mar-04 | For the kickers + speakers I would think a good LARGE 4 ch could get you good results. This would give you over 200w per sub and ~100 per channel for fronts - http://www.onlinecarstereo.com/CarAudio/ProductDetail.aspx?ProductID=14797 A real nice Kicker - probably about 250w per sub and 100+/ch for fronts - http://www.onlinecarstereo.com/CarAudio/ProductDetail.aspx?ProductID=13896 Another Kicker - a little cheaper, and a little less power, but still plenty - http://www.onlinecarstereo.com/CarAudio/ProductDetail.aspx?ProductID=13895 Lanzar Optidrive - 200-250w per sub and 125/ch for fronts - http://www.onlinecarstereo.com/CarAudio/ProductDetail.aspx?ProductID=14080 A beautiful MB Quart amp - 200w+ per sub ~100 for fronts - http://www.onlinecarstereo.com/CarAudio/ProductDetail.aspx?ProductID=14963 I think you get the point - you need a BIG 4 channel to get those CompVR's moving. The MOFO's are rated for 1000w rms a piece, and I would say if you don't get them at least 500 a piece you wouldn't be gettig your money's worth out of them. So I would agree with Ty - for that you're going to want a dedicated sub amp. |