Man, I got a problem......

 

Silver Member
Username: Kojak28

Augusta, GA USA

Post Number: 142
Registered: Feb-05
This ain't good. I got an Orion P-series 12 sub in my 2000 F-150 & I got to doing some real research on what kind of box to build for it. It is DVC 2ohm. I got the 2 ohm because I have an Autotek SX1200X and I wanted to achieve good, clean power to the sub with DECENT SPL. I was going to build a ported box....can't do it at almost 14" long (the port) in a 1.3 cu.ft box! Now, my better judgment is telling me to start over with a different sub. Anybody like Orion?
 

Gold Member
Username: Rovin

Trinidad & T...

Post Number: 3920
Registered: Jul-05
well why not use PVC pipe ports instead ........
 

Silver Member
Username: Tjmutlow

Post Number: 497
Registered: Sep-05
those are great subs, for the cost and they darn good in selaed boxes too. Is that a reg cab truck?, if so where are you putting the sub?
 

Silver Member
Username: Kojak28

Augusta, GA USA

Post Number: 143
Registered: Feb-05
Extended cab. Right behind the driver's seat with the back seat raised. I put a box "on stilts".
 

Silver Member
Username: Tjmutlow

Post Number: 551
Registered: Sep-05
that sub only needs 1.3 cubic ft vented, you should have no prob making a box for that truck
 

Silver Member
Username: Kojak28

Augusta, GA USA

Post Number: 151
Registered: Feb-05
The port has to be 14.36" long. Given the dims on this box, It ain't possible. I'm gonna have to relocate the sub.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us