Like

0/1 Gauge Wire

 

SeanC31
Unregistered guest
Where can I get a tool or something to strip it? Also, where can I get a tool to crimp it? Thanks alot.
 

Silver Member
Username: Redliner

Wilmington, Ma

Post Number: 169
Registered: Jun-05
just use a knife to strip it and use a vise to crimp it
 

SeanC31
Unregistered guest
ok cool for the stripping....but I dont have a vise so what else could i use..Thanks
 

Silver Member
Username: Redliner

Wilmington, Ma

Post Number: 170
Registered: Jun-05
umm do you own a pair of channel lock pliers you could try that it would be hard though but besides that you might have to go to someone lese cause i used channel locks and a vise so i dont know
 

Silver Member
Username: Tjmutlow

Post Number: 434
Registered: Sep-05
Since no vice, I put it on ground take a heavy hammer and do it that way, then i cover the ends with plastic cpas or tape.
 

Gold Member
Username: Southernrebel

Monroe, Louisiana USA

Post Number: 1808
Registered: Mar-04
the hammer idea works....i should know :-)

i used a hammer, welding lugs, and heat shrink.
 

Silver Member
Username: Theelfkeeper

Stockbridge, GA USA

Post Number: 687
Registered: Feb-05
hammer and center punch works great. yeah, make sure you cover the ends with heat shrink tube or tape like suggested above.
« Previous Thread | Next Thread »

Facebook

Shop Related Deals

Directory

Main Forums

Today's Posts

Forum Help

Follow Us