Space delima

 

Silver Member
Username: Texas_bass

Houston, TX

Post Number: 122
Registered: Nov-05
i was planing to put in 2 12" swx in to my truck but cant get a box where i still have room to use the jumper seat does anyone have any ideas or should i just go to 1 swx
 

Silver Member
Username: Texas_bass

Houston, TX

Post Number: 126
Registered: Nov-05
nobody has any ideas?????
 

Silver Member
Username: Alex_f

Lawrenceburg, Ky Us

Post Number: 140
Registered: Nov-05
i could make u a box that would fit , how small is the space
 

Silver Member
Username: Alex_f

Lawrenceburg, Ky Us

Post Number: 141
Registered: Nov-05
ur talkin about an alpine type x right?
 

Silver Member
Username: Texas_bass

Houston, TX

Post Number: 127
Registered: Nov-05
thats right type x

i need to measure it all out
 

Gold Member
Username: Chaunb3400

Huntsville, Alabama U.S.

Post Number: 3006
Registered: Jul-05
did u still want it, the guy never paided me, or contacted me
 

Silver Member
Username: Lexuscoop

Post Number: 240
Registered: Dec-05
would it be a good idea to make a box totaly out of plexiglass? like 3/4-1? if so how much would it cost about, these are the dementions for the subs-----Mounting Depth 6-3/4" Cutout Diameter 10-7/8"
 

Silver Member
Username: Lexuscoop

Post Number: 241
Registered: Dec-05
would it be a good idea to make a box totaly out of plexiglass? like 3/4-1? if so how much would it cost about, these are the dementions for the subs-----Mounting Depth 6-3/4" Cutout Diameter 10-7/8" the cubic foot per sub is about .5 to 1.5 i think... i know the .5 but not to sure on the 1.5
 

Silver Member
Username: Texas_bass

Houston, TX

Post Number: 128
Registered: Nov-05
1.5 is the right size but if i cant come up with anything im just going with one but how good will a plexiglass box hold up


Chauncey im still intrested in the sub
 

Bronze Member
Username: Greeney

Grove, MN US

Post Number: 16
Registered: Dec-05
http://www.carstereo.com/installs/photo_gallery_album.cfm?home=yes&photoid=19897 &galleryid=1486
 

Silver Member
Username: Lexuscoop

Post Number: 245
Registered: Dec-05
plexiglass is stronger than wood, you have to make sure its thik though... 3/4s to an inch thik
 

Silver Member
Username: Texas_bass

Houston, TX

Post Number: 129
Registered: Nov-05
ok so where do i go to get it and how go i get it together
 

Silver Member
Username: Lexuscoop

Post Number: 247
Registered: Dec-05
um... go to like home depot or lowes... they might have to order it... then like with puttin them together, seal and srew them together
 

Silver Member
Username: Alex_f

Lawrenceburg, Ky Us

Post Number: 151
Registered: Nov-05
3/4 inch plexiglass cost about 130 for a 24 x 48 sheet
 

Silver Member
Username: Texas_bass

Houston, TX

Post Number: 130
Registered: Nov-05
liquid nails , screws, and silicone
 

Gold Member
Username: Chaunb3400

Huntsville, Alabama U.S.

Post Number: 3010
Registered: Jul-05
whenever ur ready 4 it give me the word
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us