Need big help on this one guys

 

Mj 9718
Unregistered guest
i have 3 15" kicker comp vrs and a 4 channel 2200 watt earthquake amp and i was just makin sure if it is even possible to hook those 3 subs up to that amp? and if it will give me that powerhouse slam im looking for? any help is greatly appreciated. thanx.
 

Gold Member
Username: Rovin

Trinidad & T...

Post Number: 3462
Registered: Jul-05
post specs on each & well tell ya -lol ........
 

Mj 9718
Unregistered guest
EARTHQUAKE PH-2200W -----

Number of channels:4
Max power output: 2200 Watts
RMS power 2-Ohm stereo: 4x350
RMS power 4-ohm stereo: 4x175
Damping factor: >800



kicker comp vr -----

~ Dual 2-ohm voice coils
~ Frequency response 25-500 Hz
~ Power range 100-500 watts RMS (50-250W per coil)
~ Peak power handling 1000 watts
~ Sensitivity 89.1 dB SPL
 

Gold Member
Username: Rovin

Trinidad & T...

Post Number: 3466
Registered: Jul-05
each sub can be wired @ either 1 or 4ohms

is your amp bridgable & what is the specs when bridged ??????.......
 

Silver Member
Username: Islandboy808

Mililani, Hawaii US

Post Number: 173
Registered: Nov-05
since he has 3 dvc 2 ohm subs it will make a 1.34 ohm load or a 3 ohm load.correct me if im wrong rovin.
 

Silver Member
Username: Fandim

Reno, Nevada United State...

Post Number: 480
Registered: Jun-05
With three of those subs, you'll ideally need a mono amp, or three seperate amps.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us