|
Bronze Member Username: KasadudeHighland, Ut. Usa Post Number: 24 Registered: Oct-05 | which one of these are better for powering two subs that need 400 watts RMS a piece (2ohm) |
|
Bronze Member Username: Bga44Post Number: 96 Registered: Nov-05 | i have heard bad things about alpine, and good things about PG. |
|
Bronze Member Username: Bga44Post Number: 97 Registered: Nov-05 | alpine amps that is. good about subs and head units |
|
Bronze Member Username: Bga44Post Number: 98 Registered: Nov-05 | there are more forums on PG if u look around |
|
Bronze Member Username: KasadudeHighland, Ut. Usa Post Number: 25 Registered: Oct-05 | ya i've been lookin but there is not a whole lot of specifics I could find i'm leaning towards the PG because i agree what i have seen is that i've heard bad about the alpine and good about the PG. I kind of like the display screen on the Alpine though, but does it really have any purpose? |
|
Gold Member Username: RovinTrinidad & T... Post Number: 2395 Registered: Jul-05 | if that'll be = 800wrms , why are u looking @ a 600wrms amp ? what model of subs are they ? ..... |
|
Anonymous | arent there better brands then PG out there? why not go wit kicker, JL, eclipse? |
|
Bronze Member Username: KasadudeHighland, Ut. Usa Post Number: 26 Registered: Oct-05 | they can handle 300-400 from what i'm told but ya a 800 would work, i'm on a budget though so those other brands are pretty much out of the question |
|
Gold Member Username: RovinTrinidad & T... Post Number: 2401 Registered: Jul-05 | are they some crappy sony or something like that subs - thats y u did not post the model nos ??? without anybody knowinmg what model no , how can any1 rec an amp ....... |
|
Bronze Member Username: KasadudeHighland, Ut. Usa Post Number: 27 Registered: Oct-05 | no their not sony lol would buy that ever ever ever but their not great but i was on a tight budget their infinity 1030's but i'm going to be getting some diamond Audio D6's eventually but i added a new amp possibility how about the Kenwood Excelon KAC-X811D 800wats rms and 2ohms and 14.4 volts now which is the better out of these three? |
|
Silver Member Username: Bga44Tampa Post Number: 117 Registered: Nov-05 | no kenwood. |
|
Gold Member Username: RovinTrinidad & T... Post Number: 2404 Registered: Jul-05 | Inf subs are said to be great SQ but not much SPL so nothings wrong with those . those 1030 2 or 4ohms dvc ????...... |
|
Bronze Member Username: KasadudeHighland, Ut. Usa Post Number: 28 Registered: Oct-05 | ya they do have great sq which is good cause that is what i was lookin for but their 4 ohm svc gonna wire em in parallel drop down to 2 ohms and use a monoblock so ya they can handle right around 300-400 rms in the ported enclosure so ya which of these three are better? |
|
Gold Member Username: RovinTrinidad & T... Post Number: 2407 Registered: Jul-05 | Why not buy a Alpine MRD 1005 - $ is tight ? .... |
|
Silver Member Username: Bga44Tampa Post Number: 121 Registered: Nov-05 | i heard bad about alpine amps |
|
Gold Member Username: Mikechec9Http://www.cardomain.c... Post Number: 1510 Registered: May-05 | how much is your budget. you can grab a xenon 600 from here for 350 http://ikesound.com/ that scree on the alpine is good if you have a alpine deck, and a fleet of the amps. you can control all of them from the deck. fun stuff, is all. |
|
Bronze Member Username: KasadudeHighland, Ut. Usa Post Number: 29 Registered: Oct-05 | i have an alpine deck but the kenwood would power all 400 watts is it any good though i can get the pg for 250 though from sonicelectronix |
|
Bronze Member Username: KasadudeHighland, Ut. Usa Post Number: 30 Registered: Oct-05 | oh ya and i can get the alpine too for 250 |
|
Gold Member Username: Mikechec9Http://www.cardomain.c... Post Number: 1511 Registered: May-05 | kenwood's new high end line is supposed to be pretty good. although, i can only vouch for the new decks. i wouldn't trust anything from their past. |
|
Bronze Member Username: KasadudeHighland, Ut. Usa Post Number: 31 Registered: Oct-05 | i dont know if this one is the new one i know its supposed to be like their highest end i thought but i may be wrong |
|
Bronze Member Username: KasadudeHighland, Ut. Usa Post Number: 32 Registered: Oct-05 | alright I thought of somethin guys i if i get the DA D6 that needs 500 watts rms, but their dual voice coil so how does that work compared to the SVC and would the Xenon 600.1 power them at their potential? |
|
Silver Member Username: James_gTN Post Number: 385 Registered: Jul-05 | No, the 600.1 is too small. If you get the D610D2s, you'll need a mono amp that does 1000w-1200w RMS at 2 ohms. If you get the D610D4s, you'll want a mono amp that does 1000w-1200w RMS at 1 ohm or 4 ohms. More than likely you'll be looking at a 1 ohm stable amp because an amp that will give 1000w-1200w RMS at 4 ohms will cost significantly more. |
|
Bronze Member Username: KasadudeHighland, Ut. Usa Post Number: 33 Registered: Oct-05 | oh how about the Phoenix Gold R15.0:1 Octane-R 15.0:1 this one has 1000 watts rms at 2 ohms will that work? Its not stable at 1 ohm btw so would i just get the 4ohm dvc version and parallel wire or would I get the 2ohm version? |
|
Gold Member Username: RovinTrinidad & T... Post Number: 2428 Registered: Jul-05 | if u can get the Alpine 1005 = $250 -get that with 2) 2ohms dvc & u r good 2 go .......... |
|
Bronze Member Username: KasadudeHighland, Ut. Usa Post Number: 34 Registered: Oct-05 | alpine 1005 k, and thats better than the xenon right as far as quality goes, cause i prolly wont be getting the d6 for a long time as in maybe even years so i dont want to sacrifice quality for the power for something that far in advance, i would just get a new amp i would rather not but would if the situation so required, so which amp would be better quality |
|
Bronze Member Username: KasadudeHighland, Ut. Usa Post Number: 35 Registered: Oct-05 | i was just lookin at some reviews and a lot of people have said that the sq is not near as good on the alpine as the PG and that its S/N ratio is worse is this true too? |
|
Bronze Member Username: KasadudeHighland, Ut. Usa Post Number: 36 Registered: Oct-05 | hey superfly was just shoppin around and i was wondering where u found the 1005 for 250 cause every where i see it its like 369 |
|
Bronze Member Username: Ford_on_20sJacksonville, Florida Us Post Number: 45 Registered: Nov-05 | yea thats what i was wondering ive never found the alpine mrd 1005 that cheap before |
|
Bronze Member Username: KasadudeHighland, Ut. Usa Post Number: 37 Registered: Oct-05 | ok now which one has better sound quality alpine or the PG its pretty mixed now |
|
Gold Member Username: Chaunb3400Huntsville, Alabama U.S. Post Number: 1365 Registered: Jul-05 | just get a kicker, save now and get what u want |
|
Bronze Member Username: KasadudeHighland, Ut. Usa Post Number: 38 Registered: Oct-05 | trust me dude unfortuantly that is not an option cause my mom gets to control my acount, i'm pushin it with 250 bucks we had origanally agreed upon 200, but after doin some reasearch i'm 99 percent sure i'm gonna get the xenon but still would like to know which one has better SQ if i'm wrong the Alpine or the PG |
|
Silver Member Username: TjmutlowPost Number: 157 Registered: Sep-05 | The pg it is stable at 1-4ohm according to website |
|
Gold Member Username: Chaunb3400Huntsville, Alabama U.S. Post Number: 1373 Registered: Jul-05 | yep,(tryin to compete with JL. not even close) |
|
Bronze Member Username: KasadudeHighland, Ut. Usa Post Number: 39 Registered: Oct-05 | true that is one reason i was looking at it but also which one has better sound quality some people have said that the alpine makes their subs sound not as deeep is this true? |
|
Gold Member Username: Chaunb3400Huntsville, Alabama U.S. Post Number: 1374 Registered: Jul-05 | Ive never heard of them not making there subs not deep, but honestly they will be about the same on sq |
|
Bronze Member Username: KasadudeHighland, Ut. Usa Post Number: 40 Registered: Oct-05 | hmm ok how about just build quality or better features? |