|
Bronze Member Username: AjmPost Number: 13 Registered: Oct-05 | I have drawn up a box to fit in the space I have given. Dimensions are 54" x 19" x 12" split into 3 chambers which are ~ 2.24 CuFt. The subs going into the box will be 3 10" L7's but heres my problem. When it comes to a port im LOST...I need it to vent the air out of the top or front of the box, but I have no idea what size it needs to be, or how "deep" and where to position it. Help anyone? |
|
Gold Member Username: Tdeaton1021Near Tampa, Florida USA Post Number: 1198 Registered: Sep-04 | http://www.carstereo.com/help/articles.cfm?id=31 |
|
Bronze Member Username: AjmPost Number: 14 Registered: Oct-05 | As for positioning the tube. Does it really matter where I put it? Also I thought I read somewhere that kicker reccomends an area of 30 sq in and the size tube that the calc. tells me to use is only 12.57. |
|
Bronze Member Username: SuphahighflyPost Number: 12 Registered: Oct-05 | I would go with kickers reccomentdations. THe box i made from the kicker website was built to spec, and it sounds great. As for the port location they usually say not to put the opening directly benhind the sub. And are you going to use round ports or sqaure slot ports? |
|
Bronze Member Username: AjmPost Number: 15 Registered: Oct-05 | To make things a lot simpler do you guys know of any people around the forums that will draw box plans for ~$10? |