Just purchased a JL Audio ProWedge CVS212G-W3v2...

Jason Jones New member Username: Sparkarev Post Number: 3 Registered: Oct-05	Posted on Thursday, October 13, 2005 - 21:32 GMT ...with two 4 ohm 12 inch subs in it. I want to bridge it to my 4 channel Fosgate amp. Will I have to open the box and rewire the subs? And how would I wire them? Thanks
MO Gold Member Username: Suleman36 Maryland U.S.A. Post Number: 2202 Registered: Feb-05	Posted on Thursday, October 13, 2005 - 21:36 GMT Wire them in series to match get 4 ohm bridged for your amp. Pos to Neg on both coils.
Isaac W. Silver Member Username: Alias747 MN Post Number: 791 Registered: Apr-05	Posted on Thursday, October 13, 2005 - 21:37 GMT Unless that amp is 1 ohm satble you cannot bridge those subs to that amp. The subs (I assume) are SVC 4 ohm, so the only way you can wire them is to a single 2 ohm load. Look into getting a mono amp for those subs.
MO Gold Member Username: Suleman36 Maryland U.S.A. Post Number: 2203 Registered: Feb-05	Posted on Thursday, October 13, 2005 - 21:40 GMT Those subs are dual 4 ohm
Isaac W. Silver Member Username: Alias747 MN Post Number: 793 Registered: Apr-05	Posted on Thursday, October 13, 2005 - 21:45 GMT Ok, then it will work good. When he says "4 ohm" subs, I jus assume.
Jason Jones New member Username: Sparkarev Post Number: 4 Registered: Oct-05	Posted on Thursday, October 13, 2005 - 21:46 GMT Thanks Mo. On the bax of the ProWedge box, there is only I pos and neg terminal. And they should already be wire in series, correct? Coming straight from JL.

« Previous Thread Next Thread »

Main Forums

Forum Help

Follow Us