|
Bronze Member Username: OzmodiarxPost Number: 12 Registered: Sep-05 | I have two Phoenix Gold Octain R 12" subs. will this amp work? * RMS Power 300W x 1 @ 4 Ohm MONO * RMS Power 525W x 1 @ 2 Ohm MONO * Signal-to-noise ratio: 100 dB * Frequency Response: 5Hz - 350kHz * Total harmonic distortion: 0.05% * Continuously variable 0 - 18dB BASS boost * Built-in continuously variable 18dB per octave crossover * Remote bass level control "port" (remote RM-100 available separately) * Input sensitivity: 200mV - 4V * Backlit CONCEPT logo * Platinum connectors * Size: length x width x height: 300mm x 296mm x 60mm * 11.82" x 11.66" x 2.37" |
|
Gold Member Username: RovinTrinidad & T... Post Number: 1305 Registered: Jul-05 | What sub VC config is that - 2ohms svc ? What amp is that ? post model nos of both ...... |
|
Bronze Member Username: OzmodiarxPost Number: 13 Registered: Sep-05 | okay, so the subs are OCTANE-R 12 ---------------------------- '¢ 12: 12 inch 4 ohm subwoofer '¢ Sensitivity: 91dB (1W/1M) 250/500W (RMS/PEAK) SVC and there are two of these. and the amp i am looking at getting is this Concept CA-525M Description: * RMS Power 300W x 1 @ 4 Ohm MONO * RMS Power 525W x 1 @ 2 Ohm MONO * Signal-to-noise ratio: 100 dB * Frequency Response: 5Hz - 350kHz * Total harmonic distortion: 0.05% * Continuously variable 0 - 18dB BASS boost * Built-in continuously variable 18dB per octave crossover * Remote bass level control "port" (remote RM-100 available separately) * Input sensitivity: 200mV - 4V * Backlit CONCEPT logo * Platinum connectors * Size: length x width x height: 300mm x 296mm x 60mm * 11.82" x 11.66" x 2.37" Will it work? |
|
Silver Member Username: James_gTN Post Number: 310 Registered: Jul-05 | Wire both subs in parallel and you should be fine according to those specs on that amp. |
|
Bronze Member Username: OzmodiarxPost Number: 14 Registered: Sep-05 | wont hurt my subs in anyway? or my subs wont hurt the amp for some random reason? |
|
Silver Member Username: James_gTN Post Number: 311 Registered: Jul-05 | It shouldn't. You have two SVC 4 ohm subs. Wire them in parallel and you get a 2 ohm load on your amp. |
|
Bronze Member Username: OzmodiarxPost Number: 15 Registered: Sep-05 | thanks |
|
New member Username: NaxiGrove city, Ohio U.s Post Number: 1 Registered: Oct-05 | hey giys i'm new here and i'd like to know about bass filters if i would have them in my car a have 4 kickers 5.3 components like you know they come with a crossover network i don't know if that would replace the bass filters job because i also have twp 12" and one 10" my in dash player is a sony 24*4 watts peak and sometimes when i turn it up like 3/4 in the volume it starts to distortion the bass sound good but i don't know if i need bass filsters please help me thanks |
|
Gold Member Username: RovinTrinidad & T... Post Number: 1321 Registered: Jul-05 | Adam - the going by the numbers that amp will work , but the big ? is , how good a brand is CONCEPT ? I never hear of their products being mention . if it were me i' get this instead http://sonicelectronix.com/item_1491.html |
|
Bronze Member Username: OzmodiarxPost Number: 16 Registered: Sep-05 | if i was gonna go for that, would the 5.0:1 be better? |
|
Gold Member Username: RovinTrinidad & T... Post Number: 1328 Registered: Jul-05 | well 2 of your subs = 500wrms & that amp u asked about is 400wrms Better to put $115 more & have 100wrms extra headroom so your amp will run cooler . Thats just 1 site i showed if u google the model number u are bound to find it cheaper elseware online .... |
|
Bronze Member Username: OzmodiarxPost Number: 18 Registered: Sep-05 | thanks for all the help |