Amps

 

New member
Username: Moondog1212

New York United States

Post Number: 3
Registered: Oct-05
i got two mrp-m350's powering two type r 12's, just wondering if it would make a huge difference to put two mrd-m605's on them. thanks.
 

Gold Member
Username: Rovin

Trinidad & T...

Post Number: 1274
Registered: Jul-05
U did not list what ohms of subs u have - so i'm guessing its 4ohms dvc subs .
A type R is rated @ 400wrms so 2 = 800wrms .

so right now u are giving each 350
but that 605 will give each 600wrms - can be done but careful with your vol knob .

Why not buy a MONO amp like a 1000wrms or even a 1200wrms like Crossfire, ED 9 , RE 1200 etc - should be cheaper than 2 separate amps ....
 

New member
Username: Moondog1212

New York United States

Post Number: 4
Registered: Oct-05
sorry, they are dual 2ohm subs. so right now they are running at 4 ohm, they are only getting about 250rms. i kinda wanted to keep everything alpine for the most part.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us