Recomended clearance: driver to enclosure wall

 

Silver Member
Username: A3forme

Post Number: 410
Registered: Sep-04
What's the recomended distance between the sub and box, sorry I forget.... total depth of box is 8 inches, mounting depth is 6 1/4 "
 

Silver Member
Username: A3forme

Post Number: 418
Registered: Sep-04
anyone?
 

Gold Member
Username: Southernrebel

Monroe, Louisiana USA

Post Number: 1029
Registered: Mar-04
your good
 

Gold Member
Username: Carguy

Post Number: 4324
Registered: Nov-04
Around 3".
 

Silver Member
Username: A3forme

Post Number: 419
Registered: Sep-04
So then I'm cutting it too close? It's a sealed 1 cu ft box for a single 12 and a PG sub I have to put in a on old beater. But if it won't work I may have to figure something else out.
 

Silver Member
Username: Kd7nfr

Montpelier, ID United States

Post Number: 837
Registered: Apr-05
Yea, that's cutting it close. I usually give it at least 5". My current setup has about 10", and they barely get warm to the touch after some seriouse cranking.
 

Gold Member
Username: Carguy

Post Number: 4332
Registered: Nov-04
A proper enclosure could make or break a sub. Why would you waste time and money on an old beater?
That's like putting in a turbo charger in your car and then downgrading the tires to golfcart wheels.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us