Cd player problem!

 

New member
Username: Omgwtfbbq

Post Number: 1
Registered: Sep-05
So my cd player/amp were working just fine today but I decided to lower the settings on the AMP so that my sub didnt blow.

While I was messing w/ the amp my CD player cut out and now it won't play music. I can push the display button and the display will pop on for a couple of seconds, and it still takes/ejects CD's just fine. I didn't mess with the harness at all, so I think it's something with the amp.

All my fuses are fine, but the amp has no power going to it. I know I didn't blow the amp because I checked with a different amp that I KNOW isn't blown and it doesnt work either.

Help!
 

Gold Member
Username: Illuminator

Post Number: 1533
Registered: Apr-05
It's most likely the remote turn-on wire; it's lose. Also, make sure your ignition wire (red) on the headunit harness still has a good connection(It sounds like the headunit isn't turning on completely).
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us