|
slinkchris Unregistered guest | ok ive got a kicker dual 2 ohm and a kicker 350 channel, the amp says its 4 ohm stable at 350 bridged mono, and like 175 x 2 at 2 ohms stereo, should i wire the sub in series to get a 4 ohm load to match the bridged amp, or should it be in parallel to get a 1 ohm load |
|
Silver Member Username: Big_osoPost Number: 350 Registered: Jun-05 | Do not wire it to 1ohm unless your amp is 1ohm stable. It will cause it to overheat and cause more problems than you want. Wire it to a 4ohm load and youll be good. |
|
New member Username: Westlake10MD Post Number: 1 Registered: Aug-05 | Ok i have three subs that i am trying to bridge at 4ohms. But all the diagrams that I look at seem to only have 2 positives and 2 negatives. But each one of my subs seem to have a total of 4 positives and 4 negatives how do i Bridge them at 4 ohms |
|
slinkchris Unregistered guest | thanx |
|
Silver Member Username: Big_osoPost Number: 355 Registered: Jun-05 | http://www.jlaudio.com/tutorials/wiring/#1dvcs that link covers most of your wiring options and how to's |