Like

How good are those Box Building programs?

 

Silver Member
Username: Jaackdeth

United States

Post Number: 444
Registered: Sep-04
I talked to RE, and a couple other guys on another site, that say those programs are just for general use, and that if you want a GOOD ONE, have in made. Well I want to make one, but after hearing that, what else can you go by, and how do you know it's right? (never built one btw)
 

Silver Member
Username: Letto

Milwaukee, WI

Post Number: 166
Registered: Jun-05
There are people on this forum that can design one for you. Some charge a small fee, like $5, others will do it for free.

They include plans on how to build the box, supplies, estimated cost... everything. They need a lot of stuff from you tho... invluding the thiel-small paremeters, what kind of sound you're looking for (spl, sq, sql), every day or competition car, etc... they'll tell you what they need.
 

Silver Member
Username: Jaackdeth

United States

Post Number: 445
Registered: Sep-04
So how do I go about doing this? The only thing I can't give them is a pic of the trunk, as I don't have a cam!
 

Silver Member
Username: Letto

Milwaukee, WI

Post Number: 169
Registered: Jun-05
You don't need a pic of the trunk, just the dimensions.

jon's a guy that'll do it... there are others, but this is what he'll want.

1) Do you want SQ / SQL / SPL (Sound quality / mix / Pure Loudness)

2) Is this for daily use, competition, or both?

3) What music do you listen to?

4) What are the theile small specs? These will include, but are not limited to: Spl, Qts, Qes, Qms, Vas, Sd, BL, etc

5) What are the maximum desired dimensions for the box?

6) What kind and size of subs do you have?

7) How many subs do you have?

Email me this info and I'll send you a box design.

E-mail = boxbuilder777@yahoo.com
 

Silver Member
Username: Tbolt

Collipark, GA

Post Number: 380
Registered: Dec-04
Start by telling someone who knows how to build boxes
What kind of music you listen to?
Are you looking for sq,sql,spl.
How much space do you have to put the box?
 

Silver Member
Username: 54danny54

Post Number: 911
Registered: Nov-04
il build u one for 3 dollars.
email me danny__keen54@hotmail.com
 

Silver Member
Username: Jaackdeth

United States

Post Number: 446
Registered: Sep-04
Ok, so like I get all this info together, and give it to whoever and do you guys use a box program, as I have one of those?
 

Silver Member
Username: Jaackdeth

United States

Post Number: 450
Registered: Sep-04
Jon, or Danny??
 

Silver Member
Username: Camaro823

British Colu... Canada

Post Number: 153
Registered: Jun-05
Jon does a good job, haven't talked to danny. I think Jon is pretty busy now hes had quite a few ppl ask including me.

BTW Jon, have you had a chance to look at those new subs yet ?
 

Silver Member
Username: Jaackdeth

United States

Post Number: 451
Registered: Sep-04
Yea I sent him an email, along with Danny, but nothing so far. I hear ya on being busy...
 

Bronze Member
Username: 02gsxr

Post Number: 93
Registered: Jul-05
Yep, I'm really busy lol. I have like 20 different subs in my email to do right now lol. Send me an email though and I'll get you a design by the end of the week ;)

JC - sorry, I haven't been around my computer the last couple days. I'm planning on doing it tonight though. I'll have something by morning.
 

Silver Member
Username: Jaackdeth

United States

Post Number: 460
Registered: Sep-04
Thanks Jon!
 

Silver Member
Username: Camaro823

British Colu... Canada

Post Number: 161
Registered: Jun-05
thats cool Jon just wondering
 

New member
Username: Cbrannam

Mount zion, Il Usa

Post Number: 4
Registered: Aug-05
what are the programs name? im looking for one myself to try out different designs for my project trucl. it is a 94's10 reg cab that i need to put 2 12's in it
 

Silver Member
Username: Jaackdeth

United States

Post Number: 465
Registered: Sep-04
Winisd and Probox 5 I believe
 

Silver Member
Username: Tbolt

Collipark, GA

Post Number: 448
Registered: Dec-04
Bassbox 6.
 

Silver Member
Username: Ffxdevilarms

Dubuque, Iowa United States

Post Number: 939
Registered: Jul-04
WinISD is a good program to use. I have seen it in action on more then one occasion. They just need a larger DB of subs.
 

New member
Username: Cbrannam

Mount zion, Il Usa

Post Number: 5
Registered: Aug-05
Will this allow you to design the box you want an give you the air space. Can you tell it the dimensions on the box that you have in mind and get the air space that way? Do they have any programs that give you designs for a specific model vehicle?
 

Silver Member
Username: Jaackdeth

United States

Post Number: 469
Registered: Sep-04
See that's where I don't know either, as I was told it's just a GENERAL idea. I never built one before but sure would like to, have the sub, now just need the smarts! lol
 

New member
Username: Cbrannam

Mount zion, Il Usa

Post Number: 6
Registered: Aug-05
i have built some before for just a square box that is easy to build. but the project that im working on now is a little complex than that.

Where can you get a copy of the program so I can try it out? I have drawing them up in AutoCAD. Now to calculate the air space. But need to get a copy of bass box if I could.
 

Silver Member
Username: Jaackdeth

United States

Post Number: 470
Registered: Sep-04
Bassbox I don't have. Maybe google it.
 

New member
Username: Cbrannam

Mount zion, Il Usa

Post Number: 7
Registered: Aug-05
do you have a program that you can send me? i can design the box and send you a blue print of it if you have the dimensions that you want to use.
 

Silver Member
Username: Kd7nfr

Montpelier, ID United States

Post Number: 655
Registered: Apr-05
Google Winisd. It's free, but a little complicated to use. Use the tutorial it has, and you should be fine though.
 

Silver Member
Username: Kd7nfr

Montpelier, ID United States

Post Number: 656
Registered: Apr-05
Here, I put it on my web server:

http://jdesigns.servehttp.com/ftp/pub/sub_progs/winisdalpha.exe
 

Silver Member
Username: Jaackdeth

United States

Post Number: 471
Registered: Sep-04
Chris, what is your email?

Thanks Jake
 

New member
Username: Cbrannam

Mount zion, Il Usa

Post Number: 8
Registered: Aug-05
my email is chrisbrannam@kellcon.com
 

New member
Username: Cbrannam

Mount zion, Il Usa

Post Number: 9
Registered: Aug-05
or you can reach me on yahoo instant messager cbrannam2
 

Silver Member
Username: Jaackdeth

United States

Post Number: 472
Registered: Sep-04
Sent.
 

New member
Username: Cbrannam

Mount zion, Il Usa

Post Number: 10
Registered: Aug-05
did not work. must have virus on it.
 

Silver Member
Username: Jaackdeth

United States

Post Number: 473
Registered: Sep-04
Hmm! It shouldn't, it was scanned before sent, plus I used it. Will try again.
 

Bronze Member
Username: Cbrannam

Mount zion, Il Usa

Post Number: 11
Registered: Aug-05
no i have it found it on the web. but that is not what im looking for but kinda close. i want a program that you can type in the model of car and they give you different box types or software that does something like that tells you what size you need.

i have dimesions of my truck and trying to design a bandpass box that will fit behind the seat of an s10 truck

dims are
52 long MAX
can got up to 25 high
and bottom is 8.5 MAX

i have 2 12's that i want to use.
 

Silver Member
Username: Jaackdeth

United States

Post Number: 474
Registered: Sep-04
Ok, yeah I don't know about what you would use for that sorry!
 

Bronze Member
Username: Cbrannam

Mount zion, Il Usa

Post Number: 12
Registered: Aug-05
i can do the design if i know what size the bottom of the band pass needs to bee.
 

Silver Member
Username: Jaackdeth

United States

Post Number: 475
Registered: Sep-04
Hear ya, wish I could help! I see that one program that Iceman talked about might work, I'll do some checkin on it.
 

Bronze Member
Username: Cbrannam

Mount zion, Il Usa

Post Number: 13
Registered: Aug-05
that will work if u can get me a copy i will be able to help everyone out that needs prints for boxes.
 

Silver Member
Username: Jaackdeth

United States

Post Number: 479
Registered: Sep-04
I found the site, but it kind-of on the expensive side, plus I don't know if it would do what you want. Damn I kinda lost on this.
 

Silver Member
Username: Tbolt

Collipark, GA United State...

Post Number: 536
Registered: Dec-04
Got mine 4 free :-)
 

Silver Member
Username: Jaackdeth

United States

Post Number: 480
Registered: Sep-04
LOL, ok got ya. will check on that.
 

Silver Member
Username: Jaackdeth

United States

Post Number: 481
Registered: Sep-04
Iceman will it do everything you need to build a box? Or are there things you have to know before hand. Thanks
 

Bronze Member
Username: Cbrannam

Mount zion, Il Usa

Post Number: 15
Registered: Aug-05
yea i know it is costly. that is y im looking to see if anyone had a copy that i can get or they could get me the info that i need. do you know a jon that post stuff here? tryed to email him but no answer from him yet.

thanks for all the help i will call someone to see if they will give me some more info
 

Bronze Member
Username: Cbrannam

Mount zion, Il Usa

Post Number: 16
Registered: Aug-05
there any way that i can get a copy of it please
 

Silver Member
Username: Jaackdeth

United States

Post Number: 482
Registered: Sep-04
Will check that out to
 

Silver Member
Username: Tbolt

Collipark, GA United State...

Post Number: 537
Registered: Dec-04
Yeah. It does EVERYTHING. All you need to know is fb if its a ported box, and vb.
 

Silver Member
Username: Tbolt

Collipark, GA United State...

Post Number: 538
Registered: Dec-04
chris I'll see what I can do
 

Silver Member
Username: Jaackdeth

United States

Post Number: 483
Registered: Sep-04
Ice, do you make them to?
 

Bronze Member
Username: Cbrannam

Mount zion, Il Usa

Post Number: 17
Registered: Aug-05
ok thanks ice. i can make them but i just need the program for this project.

jack what kind you want?
 

Silver Member
Username: Jaackdeth

United States

Post Number: 484
Registered: Sep-04
LOL, I'm so late for class, I have a RE SX 15" RE said it would work best in a ported box, I can't do it now, but what would you need from me? I won't be back till later
 

Silver Member
Username: Tbolt

Collipark, GA United State...

Post Number: 540
Registered: Dec-04
Nope, don't even have a job yet. I'm not lazy, just too young. lol
 

Silver Member
Username: Tbolt

Collipark, GA United State...

Post Number: 542
Registered: Dec-04
No thanks necessary.
 

Silver Member
Username: Jaackdeth

United States

Post Number: 489
Registered: Sep-04
just checking to see if you got the program Chris
 

Silver Member
Username: Tbolt

Collipark, GA United State...

Post Number: 603
Registered: Dec-04
Jack and chris, did the programs work?
 

Gold Member
Username: Ffxdevilarms

Dubuque, Iowa United States

Post Number: 1017
Registered: Jul-04
There are too many chris's on this forum, i am getting confused.
 

Bronze Member
Username: Cbrannam

Mount zion, Il Usa

Post Number: 18
Registered: Aug-05
Jack.

Yes the program worked. Now that I have my box designed I can help you other guys with yours if you want me too. My box from the program says that it will be able to hit 117db @ 184hz running 75 watts. I don't think that is too bad for a start. That is just goin off a standard box design for my truck now im goin to mess with the numbers to see what I can get if I mod the box a little.
 

Silver Member
Username: Jaackdeth

United States

Post Number: 498
Registered: Sep-04
Great. I'll get back to you, and sorry I missed ya lastnite.
 

Bronze Member
Username: Cbrannam

Mount zion, Il Usa

Post Number: 19
Registered: Aug-05
that is cool i will be here all day today.
« Previous Thread | Next Thread »

Facebook

Shop Related Deals

Directory

Main Forums

Today's Posts

Forum Help

Follow Us