|
New member Username: CrydeePost Number: 1 Registered: Jul-05 | Can anyone explain to me the correct way to wire these Infinity Kappa's 673.7is to this Profile AP600? Thanks in advance, I just want to get my first system done right! |
|
New member Username: CrydeePost Number: 2 Registered: Jul-05 | Well the speakers are 2 ohm impedance, and the Amp can do 100 x 2 @ 4 ohms, so if I wired them in series to one terminal would I get 100 to each? Or could I just straight plug each one to it's own terminal for 100 rms to each speaker? Or do I need to order the 6x9 Kappas that are 4 ohm speakers, havn't clicked ordered yet.. just want to double check. As I said first system, would like to get it right. Thanks! |
|
Bronze Member Username: WinnSanta Ana, California US Post Number: 96 Registered: Jun-05 | Well, the impedance of the speaker is 2ohm and the amp also can load at 2ohm (150watts x 2 at 2ohms). So just normally connect the speaker the output from the amp. nothing is complicate for this. 2ohm impedance speaker is fine for the amp. You will get more power than the 4ohm. Stay with the 2ohm speakers. |