|
Gold Member Username: InvainMichigan United States Post Number: 2912 Registered: Aug-04 | Remember, I do have the G5.1 version, if there is any difference from the G4. Anways, I told you a couple days ago that 4 gauge just doesn't wanna fit in the amp. You said it will be a tight squeeze, but I think this is tighter than it should be. I know the 250's came standard with 8 gauge plugs and 2 x 30 amp fuses, which is what mine has. I want to be able to run my stinking 4 gauge to my amp, and since I have 2 30 amp fuses, I'm thinking I have the 8 gauge plugs. I need some help. |
|
Gold Member Username: InvainMichigan United States Post Number: 2913 Registered: Aug-04 | This is what I need, isn't it? http://www.ebay.com - item number 5767848261 Also, if I do get new plugs, how do you change them? From what I can see, you just pull the old ones out and push the new ones in? Or do you have to take the casing apart on the amp and do it from inside? |
|
Gold Member Username: James1115Wilton, Ct Post Number: 3512 Registered: Dec-04 | yeah Nick those are them. also yeah you just pull out the old and in with the new takes 2 seconds. dont forget to change the fuses also when you go to the 4 guage plugs to 2-40 amp fuses. |
|
Gold Member Username: InvainMichigan United States Post Number: 2915 Registered: Aug-04 | Ahhh. Thanks a ton James. I'm gonna order those plugs right now. |
|
Gold Member Username: CarguyPost Number: 3372 Registered: Nov-04 | Joe, don't expect the 4gauge wire to fit. It's a bit deceiving. You will need to trim the wires slightly. |