Issac or Fishy ne one

 

Silver Member
Username: Loudon

Post Number: 218
Registered: Jun-04
Should I get dual 2 ohm or 4ohm Compvr's for a Kicker Kx600.1 i wanted to run it at 2 ohms
 

Silver Member
Username: Alias747

MN

Post Number: 160
Registered: Apr-05
Are you getting 2 subs? If that's the case, it doesn't really matter between dual 2 ohm or single 4 ohm. In the end you will get a 2 ohm load.

Uhhhh.. the single 4 ohm will be easier to wire!! LOL. If your looking for something to tip the scale for you!
 

Gold Member
Username: Carguy

Post Number: 3130
Registered: Nov-04
Mike, if you're trying to run the sub at 2ohms, then you don't have much choice. You need 4 ohms DVC sub. That wired in parallel will give you 2ohms.
A 2ohms DVC will give you 4ohms or 1 ohm.
If you're getting 2 subs, then you will need 2ohms DVC subs to get 2ohms total load.
 

Silver Member
Username: Alias747

MN

Post Number: 161
Registered: Apr-05
hahaha, I thought he was saying dual 2 ohm or single 4 ohm. lol. I Just read the post wrong! Sorry :-)
 

Silver Member
Username: Loudon

Post Number: 219
Registered: Jun-04
So i should 2 4ohm dvc subs to wire them in parallel to get a 2 ohm load for the kx 600
 

Gold Member
Username: Carguy

Post Number: 3141
Registered: Nov-04
Mike if you're getting 2 subs, then it has to be 2ohms DVC or 4ohms SVC.
 

Silver Member
Username: Loudon

Post Number: 220
Registered: Jun-04
well the 05 comps are dvc so i should get dvc 2 ohms... sounds good to me
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us