I have a pair of thunder 8000 subs with a 801d amp.help

 

New member
Username: Junior11124

NyUs

Post Number: 1
Registered: May-05
i have a pair of thunder 8000 subs with a 801d amp.i dont know what zise box and wich 1 sealed ,vented or bandpass i should go with . are the amp and the subs the wright convination? pls help me out with this .are this subs any good?
 

New member
Username: Junior11124

NyUs

Post Number: 2
Registered: May-05
ohh.the subs are 10"
 

Gold Member
Username: Insearchofbass

Post Number: 2177
Registered: Jun-04
do them in 2.09 cf each ported at 29 hz and drop the subs in youll be at 2.00 cf after the sub and do two slot ports 8 inches high by 2 inches wide each sub 28 wide by 12.75 high by 20.25 deep internal so using .75 mdf board the external measurements would be 29.5 wide by 14.25 high by 21.75 deep this will be a nice sound quality box
 

Gold Member
Username: Insearchofbass

Post Number: 2178
Registered: Jun-04
i meant one slot port 2 inches wide by 8 inches high per subwoofer....(a total of two on the box)
 

Gold Member
Username: Insearchofbass

Post Number: 2179
Registered: Jun-04
if you really wanted to get fancy you could make the port 8 high by 6.5 wide and then make an adaptor plate that lets it slim back to 8 high by 2 wide to return to the 29 hz port tune......why do this you ask? for a nice peak at about 51 to 52 hz or so for an spl burp if you wanted to compete with them...you wouldnt want to play a test tone less that 48 hz in it that way though and it would only play safely for about 3 seconds or so you could gain as much as 8 db with that spl port but remember 48hz and up for no more than 3 seconds or so
 

New member
Username: Junior11124

NyUs

Post Number: 3
Registered: May-05
i dont knoww much about the details ur telling me . ok,,, can u tell me if where i can get it allready made cause i dont have the tools or the knowlege to do it. i have them in a sealed box and the box zise is 25 , 11 ,13 . but it doesnt have a good sound
 

Gold Member
Username: Insearchofbass

Post Number: 2182
Registered: Jun-04
thats because your in a sealed box ....i no this sub becaue i had one on my mtx 81000d at 750 rms ported to 37 hz with 1.00 cf. of air space before the sub and port ......one of these subs is capeable of 140 db plus on your amp ..we did 140 db and 145.9 db (burp box) in two different vehicles with your sub ported with your power ...we can make you the box i described or you can go to a shop and have it perfessionally made...write down what i gave you and head to the shop.....you wont be disappointed
 

Gold Member
Username: Insearchofbass

Post Number: 2183
Registered: Jun-04
those spl measurements were with one mtx 8000 10 inch
 

Gold Member
Username: Insearchofbass

Post Number: 2184
Registered: Jun-04
you should be in the low 130's db wise with the sound quality setup and when swapping the plate out for the spl part youll be up to about 140 db using your amp if the gains are set right on the amp
 

New member
Username: Junior11124

NyUs

Post Number: 5
Registered: May-05
so can u make it for me and how much will u charge me for it ?
 

Gold Member
Username: Insearchofbass

Post Number: 2185
Registered: Jun-04
well with shipping and materials and our cost labor it wont be the most cost effective for you but i tell you what id do go to a shop and have them give you a price and let me know how much and ill see if we can beat it for you and ill leave it up to you which way you want to go
 

Gold Member
Username: Insearchofbass

Post Number: 2186
Registered: Jun-04
its funny because i have two brand new mtx 8000 10's sittin here like yours waitin for a box lol
 

New member
Username: Junior11124

NyUs

Post Number: 6
Registered: May-05
its hard for me to find a shop , any way ,,, where r u located?
 

New member
Username: Junior11124

NyUs

Post Number: 7
Registered: May-05
or do u think i can get the box at ebay with the spe. u gave me?
 

Gold Member
Username: Insearchofbass

Post Number: 2188
Registered: Jun-04
not a chance this is custom
 

New member
Username: Junior11124

NyUs

Post Number: 8
Registered: May-05
ok ,,, tell me where ur located and how much u want to make my box?
 

Gold Member
Username: Insearchofbass

Post Number: 2189
Registered: Jun-04
175 too much? plus shipping 50 pounds cost me 32 bucks to ship before i live in york pa 17404 area code
 

Gold Member
Username: Insearchofbass

Post Number: 2190
Registered: Jun-04
my price includes materials
 

New member
Username: Junior11124

NyUs

Post Number: 9
Registered: May-05
is a little to much for me .
 

Gold Member
Username: Insearchofbass

Post Number: 2191
Registered: Jun-04
tell me how much you think is fair i can come down
 

New member
Username: Junior11124

NyUs

Post Number: 10
Registered: May-05
how about 15o with shping included?
 

Gold Member
Username: Insearchofbass

Post Number: 2193
Registered: Jun-04
175 shipped and you got a deal
 

Gold Member
Username: Insearchofbass

Post Number: 2194
Registered: Jun-04
carpeted and all
 

Bronze Member
Username: Junior11124

NyUs

Post Number: 12
Registered: May-05
thats still too much for me man . come on men ur not going to spend that much money in mate. and i live in ny so the shipping should not be that much . if u want i can pay for the shipping from here and send the shipping label to u and u do it for 125.00
 

Gold Member
Username: Insearchofbass

Post Number: 2195
Registered: Jun-04
150 shipped it is
 

Bronze Member
Username: Junior11124

NyUs

Post Number: 13
Registered: May-05
ok so wen can u have it ready?
 

Gold Member
Username: Insearchofbass

Post Number: 2196
Registered: Jun-04
i get on gettin the materials tomorrow prob have it done over the weekend .....how did you wanna do the cash?
 

Bronze Member
Username: Junior11124

NyUs

Post Number: 14
Registered: May-05
i can send u a mo, or send a paypal if u have a paypal account.
 

Gold Member
Username: Insearchofbass

Post Number: 2197
Registered: Jun-04
you can do it through paypal whats your email?
 

Gold Member
Username: Insearchofbass

Post Number: 2199
Registered: Jun-04
you there junior?
 

Bronze Member
Username: Junior11124

NyUs

Post Number: 15
Registered: May-05
wen do u want me to send u the payment?
 

Gold Member
Username: Insearchofbass

Post Number: 2201
Registered: Jun-04
now..i dont want to get the materials until then...im varified with paypal
 

Gold Member
Username: Insearchofbass

Post Number: 2202
Registered: Jun-04
send me your email addy and ill send you a request for the money through paypal
 

Gold Member
Username: Insearchofbass

Post Number: 2203
Registered: Jun-04
tell me your email addy i mean
 

Bronze Member
Username: Junior11124

NyUs

Post Number: 16
Registered: May-05
junior1124@optonline.com
 

Gold Member
Username: Insearchofbass

Post Number: 2204
Registered: Jun-04
i sent you a paypal money request
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us