Wiring help!!!


I'm attempting to set up my kicker KX 400.2 amp to my two 10" mtx 6000 subs... I hook everything up, turn on the the car, and i get no sound. I know the amp works, and I checked all the fuses, and all the connections. Does any one have an idea on what might be causing this? Could it be a bad ground? could my power wire be bad? could it be because I only have a 6 gauge wiring kit and the amp says it needs 4 gauge? I haven't been able to figure this out, and it's starting to piss me off!!! Thanks for any help.

Gold Member
Username: Glasswolf

Post Number: 1425
Registered: 12-2003
could be a bad ground, could be the amp isn't getting a remote trigger signal.
test everything with a meter.

Silver Member
Username: Its_bacon12

Post Number: 185
Registered: 12-2003
make sure you have:

power (+)
ground (-)
remote turn on

any of these could be the problem, and make sure your ground is as short as possible

chris henryroo
Unregistered guest
JL audio 300/4 and 500/1
« Previous Thread | Next Thread »


Shop Related Deals


Main Forums

Today's Posts

Forum Help

Follow Us