|
New member Username: AveoxTorrance, Ca. USA Post Number: 1 Registered: Apr-05 | I want to build a new box. How big is too big ? Should I go sealed or ported with 2 W6 13,s I have no problem with space or power. Any ideas would be very helpfull e-mail thanx |
|
Gold Member Username: SubfanaticWalton, Ky Post Number: 2206 Registered: Dec-04 | well how much pwower are you giving these big boys? lol, also if you want sq-go with sealed, spl-go with ported box tuned 5 hrtz below your cars peak frequency(this will give you the best spl i think you can get in your car with the setup i believe) or you cna port it to a nice frequency for nice spl and sq mixed |
|
Silver Member Username: Suleman36Post Number: 696 Registered: Feb-05 | I use to have 2 12w6v2's sealed in a jl prowedge box. It was 4.23 cubic ft and sounded great. Best sound quality with good amount of spl for everyday driving. |
|
New member Username: AveoxTorrance, Ca. USA Post Number: 2 Registered: Apr-05 | MY GOD this form rocks with people. Hey Im sorry Subfanatic and Mo for not getting back at ya tell 11:19 TJ time. About the 1st reply I have a new but old my spelling sucks big time Hifonics XI-COLOSSUS 2-Channel Amplifier Description: - 600 Watts x 2 Ch into 4 Ohms (Stereo) damping is 400 @ 2 Ohms I think it's at 4 Ohms I think it's a typo in the book - 900 Watts x 2 Ch into 2 Ohms (stereo) - 1200 watts x 2 Ch into 1 Ohm (stereo) - 1800 Watts x 1-Ch into 4 Ohm (bridged) - 2400 Watts x 1-Ch into 2 Ohms (bridged With 2 1.5 fared caps one for each power in 2 Yellow top Optminas and a 265amp alt Question How the hell do find my trucks peak frequency out ? Im looking for mixed sound. I like the slotted ported box so far. what's your opinion on that I have lots of room and I can build a strong box I need some plans or a app to draw it out. Any free downloads you know of ? The rest of the system has a 12JLw3 stealth box under the front middle seat JL 250 mono amp For the doors I have Kappa perfect 5.1 rear and 6.1 front using ( I know it's a tad small) JL 300x 4 I also Have a hiphonics 600w 2 ch Zuse running a JL rear under seat 2 10" stelthbox.. To MO Why so big Cubic Ft going sealed ? How did it take the power ? Do you have any plans of it ? thanks in advance Aveox |
|
Gold Member Username: SubfanaticWalton, Ky Post Number: 2325 Registered: Dec-04 | just go to a local car audio store and ask them to test it, basically they will play a bunch of tones iny our car and whatever is thenloudest, then port a box 5 hrtx below that for tons of spl |
|
Silver Member Username: Suleman36Post Number: 702 Registered: Feb-05 | Yeah i had 2 of them in one big sealed box that it came in. The JL prowedge box. YOu can find it under enclosures on www.jlaudio.com It resulted in optimum sound quality in that box and it had polyfill already inside it. I ran it off my ppi pcx 2200 800wattrms amp that im selling now on ebay. Perfect combo! p.s. i still have the 12w6v2's in the box in my house. |