Car Subwoofer Help! Bass tube hook up???


New member
Username: Beansfranks

Riverdale, NJ United States

Post Number: 1
Registered: Apr-05
I recently bought a bass tube Metrik 8-inch Powered Tube Subwoofer.

Features include:
8-inch tube speaker with amplifier
200 mm paper coated cone foam edge woofer
320 watts peak power
80 watts RMS
20-200Hz frequency response
80-120Hz(adjustable) outlet
DC12V-14.4V negative ground power source

Do I need to have an amp to hook this up, or can i just plug it in? I was wondering what I need to do to get this tube sounding good.


Bronze Member
Username: Shackashacka

Post Number: 30
Registered: Mar-05
I would assume you would be able to just hook up the interconnects and run the power/ground/etc... wires if its a "powered" tube subwoofer as you say.

Silver Member
Username: Araknid


Post Number: 380
Registered: Nov-04
no if its powered then it has a built in amp thats already connected to the speaker you just need to hook up the power and the signal wires to the amp.

New member
Username: Beansfranks

Post Number: 2
Registered: Apr-05
Thanks. I'll try it when I get it, I'll let ya know what happenes.
« Previous Thread Next Thread »

Main Forums

Today's Posts

Forum Help

Follow Us