|
Silver Member Username: Suleman36Post Number: 410 Registered: Feb-05 | Ive decided to stay with the 10W7 H.O. wedge box and run it off the 500/1. For my componants in the front i went with the image dynamics cxs62 and im gonna power them with the ppi art 300.2 and use a batcap in place of caps. IM using the eclipse cd8454 for the HU. Am i missing anything else? What gauge power wire do i wanna run if its going in a sedan? What do i wanna set my HU crossovers too? jonathan help me out since you have that eclipse. Help me tune this thing..thanks p.s. How does knukonceptz sound for rca's??? |
|
Gold Member Username: SubfanaticWalton, Ky Post Number: 1617 Registered: Dec-04 | those RCA's will work great, but i would run 4 gauge wireing |
|
Silver Member Username: Suleman36Post Number: 414 Registered: Feb-05 | Speaking of the RCA's. For my system will i need 2 sets of 2 channel running from each amp to the HU. Thanks I think 4 meters will be plenty. |
|
Silver Member Username: Suleman36Post Number: 415 Registered: Feb-05 | .. |
|
Silver Member Username: Suleman36Post Number: 416 Registered: Feb-05 | jonathan let me know |
|
Gold Member Username: Jonathan_fGA USA Post Number: 3556 Registered: May-04 | 4 guage kit will do the trick for the amps, remember that you'll need a distribution block for both those amps. As far as the crossover setting, it depends on whether you're doing easy or pro mode. Easy mode you don't as many choices of crossover slope, but either way begin with around 80hz for both drivers. If it sounds like too much bass in that region, move the HPF for the components up to 100 or 125hz. That should give you a start. Not too hard, just have to play around with it to get the sound you want. |
|
Silver Member Username: Suleman36Post Number: 417 Registered: Feb-05 | How do i wanna use the Batcap along with the Distribution block and which and how many distribution blocks should i get from knukonceptz.com and do i need 2 sets of 2 channel rca's? |
|
Silver Member Username: Suleman36Post Number: 419 Registered: Feb-05 | ? |
|
Silver Member Username: Sony224422Deep River, CT US Post Number: 118 Registered: Dec-04 | yeah you'll need two sets of RCA's.. since your going hook two together right? I think im going to end up doing the same thing with my two amps, i hope it works haha. And if your only running two amps you only need one dis. block with atleast two out puts, probably should get one with like 3 or 4 incase you want to add more amps to your system. |
|
Silver Member Username: Suleman36Post Number: 421 Registered: Feb-05 | Thanks eric |
|
Silver Member Username: Suleman36Post Number: 422 Registered: Feb-05 | which one of these distribution blocks do i wanna go with. Is it the 4awg going into 2 8 awg or??? http://www.knukonceptz.com/productMaster.cfm?Category=Distribution%20/%20Fuse%20 Blocks# |