on the subwoofer, are there one or two sets of positive and negative leads. And what are the subs impendence (ohms). and what type of amp are u running.
well first, u will only be able to achieve a 1.5 ohm load or a 12 ohm load on the amp. niether of which will work. You will have to purchase a mono subwoofer amp that is 1 ohm stable to power the three subs. To achieve the 1.5 ohm load, you will wire in parallel. connect all the positives from all the subs to the positive on the amp, and the same with the negatives. Pretty simple. But there is a 99% chance that the amp u are using is not 1 ohms stable while bridged. It is most likely 4 ohms stable. What type of 12's are they?