|
Bronze Member Username: TragedySan Jose, CA Post Number: 54 Registered: Feb-05 | DLS 8.3 components use two passive crossovers. One powers the midrange and the other powers the woofer/tweeter. The way they suggest hooking that up is running 1 line to the midrange filter and then splicing into that line and running a seperate one to the other crossover for the woofer/tweet outputs. Would this present a 2ohm load to an amplifier? or would this still be a 4ohm load? i am trying to pick out an amp and i can go with the lower model at a cheaper price if its a 2ohm load. http://dls.se/pdf/maniridium_eng.pdf if you go to page 3 they show you exactly what i am describing you.. Thx |
|
Gold Member Username: Jonathan_fGA USA Post Number: 3460 Registered: May-04 | It will present a 4 ohm load same as if the crossover were in a single location. The reason that they come with seperate crossover modules is to reduce chances of driver crossovers interfering with one another. |