Like

Question about Alpine CDA-9830

 

RH
Unregistered guest
Hi all,

I have a pretty quick question that I was hoping that someone would be able to answer. I have an Alpine CDA-9830 HU, Polk DB Series Satalites, and M301 Mono Amp for my Sub. I've read that setting the LPF/HPF is better in the amp, but if I set the HPF to 80 and the LPF to flat, what would I set my amp to? Any suggestions would be appreciated.

Thank you,

Dazed and Confussed
 

RH
Unregistered guest
Humm... Maybe it wasn't such a quick question... :-(
 

Silver Member
Username: Marley289

Post Number: 132
Registered: Nov-04
you should just set the one on the amp to LPF, the one on the HU doesnt make too much of a difference but the one on the amp makes a bigger impact depending on where its set.
 

RH
Unregistered guest
Lee thanks for the response.. :-)
What do you think a good all around Freq setting would be??

Thanks again,

RH
 

Silver Member
Username: Marley289

Post Number: 135
Registered: Nov-04
on the deck? i have a pioneer deck and i leave mine at 80.
 

RH
Unregistered guest
No, I meant on the amp.... This MRD-M301 Amp is very confussing since it's all done through the digital control panel.. :-(
« Previous Thread | Next Thread »

Facebook

Shop Related Deals

Directory

Main Forums

Today's Posts

Forum Help

Follow Us