Matching gain settings for Low RMS components


Unregistered guest
I'm curious.. is it possible to set the gains on a powerful amp lower than u normally would inorder to match with a low Peak RMS component set?
Like if i had a 100 RMS comp. set and powered it with a 200 RMS x2 4ohms amp..and set the gains low..

Gold Member
Username: Carguy

Post Number: 1149
Registered: Nov-04
Gregorious, the gain/level is not a volume control. You have to set it correctly. If your HU is 4v, set it to 4v.
A speaker will not blow from getting a little extra clean power.

Unregistered guest
Excellent..thanks Isaac :-)
« Previous Thread Next Thread »

Main Forums

Today's Posts

Forum Help

Follow Us