need help wiring subs..please help me thanks!


im thinking aobut getting 2 12 inch L7s and a sx1250.1 ... .. is it possible to run both of the subs off the one amp... how should i do this? i want to split the watts per sub so its 625 watts per sub... let me know what you think thanks

oh and what ohm configuration shud i get?

Silver Member
Username: Rzarector

Coquitlam, Bc Canada

Post Number: 136
Registered: Dec-04
im asuming the amp is 1250 watts at 2 ohms? if so get 2+2ohm dvc config for the subs

Bronze Member
Username: Byrumjr

Post Number: 13
Registered: Jan-05
This is for two 12 inch L7s dual 4-ohm voice coils only. The 1250.1 will push 1250 watts RMS x 1 at 1 ohm (1-ohm stable) You will have to wire the subs in Parallel to get a 1ohms load. This will split the watts in-between the two subs 625 watts per sub.

As for the Kicker Solo-Baric L7 dual 4-ohm voice. Features & Specs. power range 75-750 watts RMS (375 watts per coil) so you need to have both coils hook up to handle that much watts. (Kicker recommends a 2- or 1-ohm load for maximum performance)

« Previous Thread Next Thread »

Main Forums

Today's Posts

Forum Help

Follow Us