|
Geo Morey Unregistered guest | Ok I want to buy some subs and amp, i want it to hit real good, so i came to the conclusion that i might get the audiobahn ALUM12Q, and the audiobahn A8000T amp, now what cables, ohms, and anything else do i need to make it sound properly. I dont understand the ohms and crap like that.. Also i really like the JL audio subs, but dont konw which one is good, and with what jl audio amp would i put it with the subs??? PLEASE HELP |
|
Juggalo Jeff Unregistered guest | haa i dont know if you want to talk about audiobahn on this site lol u may see why |
|
geo Unregistered guest | Why are they bad??? |
|
Gold Member Username: GlasswolfNorthWest, Michigan USA Post Number: 7270 Registered: Dec-03 | I'mm not a big audiobahn fan. if you have a budget for amp and subs in mind I could suggest some alternatives to consider if you like |
|
geo Unregistered guest | Go ahead tell me some good ones, im willing to spend like 200 on subs and probably 350 on amps...tell me your alternatives, also are the pioneer TS-W2000SPL 12 good ones, and what amp could i run that with.. SHould i get one or two?? |
|
Gold Member Username: GlasswolfNorthWest, Michigan USA Post Number: 7274 Registered: Dec-03 | two Alpine Type R subs. about $100 each. Alpine MRD-1001 amp to drive both together |
|
geo Unregistered guest | ok what ohms do i run as that, i dont even understand ohms..lol |
|
Silver Member Username: James1115Ct Post Number: 177 Registered: Dec-04 | het 2-type r 12's dual 2ohm subs and run them parellel/parellel at 2ohms! should sound really good. here is the new model # SWR-1222D you wont be able to buy those on ebay for a little while but here are this years model # which you can get for really good deals on ebay. swr-1221D make sure you get that model # and not the dual 4ohm versions. James |
|
Bronze Member Username: Jlprix91West, Michigan Usa Post Number: 41 Registered: Oct-04 | actually your going to want to wire those voice coils in a series and parralell to the amp for a two ohm load. |
|
Silver Member Username: James1115Ct Post Number: 178 Registered: Dec-04 | yup your right my mistake. |
|
geo Unregistered guest | Would i need a capacitor?? |
|
geo Unregistered guest | "actually your going to want to wire those voice coils in a series and parralell to the amp for a two ohm load." How do i do this??lol.. I just konw how to hook amp to sub and to battery |
|
Silver Member Username: James1115Ct Post Number: 188 Registered: Dec-04 | http://jlaudio.com/tutorials/wiring/index.html#2dvcsp |
|
geo Unregistered guest | I seriously dont get it!! |
|
geo Unregistered guest | Glass is there anything cheaper than the MRD 1001, that will sound good too.. |
|
geo Unregistered guest | Glass is there anything cheaper than the MRD 1001, that will sound good too.. |
|
Gold Member Username: GlasswolfNorthWest, Michigan USA Post Number: 7290 Registered: Dec-03 | look at MTX they have a mono amp rated for about 800 watts RMS x 1 @ 2 ohms I forgot the model though. It's pretty affordable on-line if ya shop around or check eBay though. |