Need advice on all highs no mids component.

 

Henray
Unregistered guest
Wondering if u guys can help on this.. a friend of mine just got himself a component system but the sounds are all highs and almost zero mids. They're running off of the headunit which i believe is the problem. I told him to get an amp to power em..but he wanted a cheaper alternative. What can u guys recommend to help tone down the tweeters and bringout the mids.The HU is a cheap no-brand (RODEK) with no customiseable EQ functions,'cept for the 4 useless presets..its putting out about 25W x 4(rrright..) and the speakers are Lightning Audio B1.525c 60W rms nominal power handling.
 

Gold Member
Username: Glasswolf

NorthWest, Michigan USA

Post Number: 6598
Registered: Dec-03
hey check the phase on his mids.
he may have gotten one reversed pos/neg.
that'd cause what you're describing to a tee.
make sure all the pos/neg connections are correct at the radio, crossovers, mids, and tweeters.
it all has to be wired straight.
 

Henray
Unregistered guest
Will do..thanks man.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us