Help installing an AMP Please

J. Miller New member Username: Jmiller Post Number: 6 Registered: Nov-04	Posted on Saturday, December 18, 2004 - 00:29 GMT I'm getting ready to install a 50x4 AMP to push 4 60RSM 6 1/2 speakers. First I'd like to know what wire gauge should I use to wire the speakers to the AMP? Second, I got my hand on the wiring information for my car, 04 Accord, but there is not AMP turn-on wire coming from the HU. Where else do I get a source for the 12v turn-on wire for the AMP. Thanks.
J. Miller New member Username: Jmiller Post Number: 7 Registered: Nov-04	Posted on Saturday, December 18, 2004 - 00:34 GMT I see that there is a (+) power antenna wire. MY car does not have a power antenna. Can this line be use to turn-on the AMP?
xxmdfmkxx Silver Member Username: Xxkmfdmxx Saint Petersburg, FL USA Post Number: 123 Registered: Oct-04	Posted on Saturday, December 18, 2004 - 00:41 GMT Is it a stock HU? Most if not all Aftermarket Headunits have the Power antenna wire.
xxmdfmkxx Silver Member Username: Xxkmfdmxx Saint Petersburg, FL USA Post Number: 124 Registered: Oct-04	Posted on Saturday, December 18, 2004 - 00:42 GMT Is it a stock HU? Most if not all Aftermarket Headunits have the Power antenna wire
CarAudio And PC Unregistered guest	Posted on Saturday, December 18, 2004 - 00:53 GMT That + Power Antenna can be used as the Remote Turnon for your AMP. It works just the same, and puts out 12V.
J. Miller New member Username: Jmiller Post Number: 8 Registered: Nov-04	Posted on Sunday, December 19, 2004 - 00:19 GMT What wire AWG should I use to connect the Speakers to the AMP?
GlassWolf Gold Member Username: Glasswolf NorthWest, Michigan USA Post Number: 6577 Registered: Dec-03	Posted on Sunday, December 19, 2004 - 01:59 GMT 16ga is plenty for components 14ga is good for subs

« Previous Thread Next Thread »

Main Forums

Forum Help

Follow Us