Like

Fuses????

 

New member
Username: C12698

Oklahoma

Post Number: 8
Registered: Nov-04
I am running 2 amplifiers, which are pushing two alpine swr-1221d's, both amps have 2 30A fuses, so 4 all together. I am wondering what is the correct and safe size fuse I need to use in my inline fuse holder????
 

Bronze Member
Username: Press1

Yuba City, CA USA

Post Number: 13
Registered: Nov-04
Any current overload device is used to protect the wire, not the load, so you would need to size the fuse according to the size of your main power wire going to the inline fuse holder.
 

Silver Member
Username: Carguy

Post Number: 291
Registered: Nov-04
Hey Chad, most fuses are 60A. Check under the hood. If your wire is 4 gauge, then it can handle higher amperage. Take your watts for the amps divide by 12v, and it'll give you the amps. That is the fuse size the amps will be requiring.
 

Bronze Member
Username: Lbeckner

Tulsa, Ok Usa

Post Number: 81
Registered: Oct-04
150
« Previous Thread | Next Thread »

Facebook

Shop Related Deals

Directory

Main Forums

Today's Posts

Forum Help

Follow Us