Like

Jeep GCH'99 amp installation

 

New member
Username: Otash

Post Number: 1
Registered: Nov-04
does any body know how to hook up new amp without taking off factory(infinity gold)? Do i hook it up to factory amp or to player?
I have a mono amp that will be used only for subwoofer.
 

Gold Member
Username: Glasswolf

NorthWest, Michigan USA

Post Number: 5712
Registered: Dec-03
you get a Metra adapter harness that taps into teh factory system and gives you a set of RCA pre-outs to use for the amplifier.
That's the only good way to do it.
www.metra-online.com
 

New member
Username: Otash

Post Number: 2
Registered: Nov-04
where do i hook it up? to player or to factory amp? can u give me the full name of this adapter?
 

New member
Username: Otash

Post Number: 3
Registered: Nov-04
is it Metra Amplifier Integration Wiring Harness Adapter?
 

Gold Member
Username: Glasswolf

NorthWest, Michigan USA

Post Number: 5731
Registered: Dec-03
yes
 

New member
Username: Otash

Post Number: 4
Registered: Nov-04
where can i find it?
everywhere i look it is for ford models.
 

Gold Member
Username: Glasswolf

NorthWest, Michigan USA

Post Number: 5738
Registered: Dec-03
any car audio shop should be able to order one or have it in stock.
you could try through metra-online or partsexpress.com or similar as well.
 

Help2
Unregistered guest
Is that a LOC or something...
never heard of the metra.
A LOC will work most likely too.
 

Gold Member
Username: Glasswolf

NorthWest, Michigan USA

Post Number: 5746
Registered: Dec-03
Help2, the Jeep's premium system is similar to the Bose and Mach systems. It uses amplifiers in the stock system, so a line reducer is required to get a clean line level signal. there is a harness sold that splits off the factory amp harness to provide the proper RCA line outs for adding an amplifier and subs to the factory system.
 

New member
Username: Otash

Post Number: 10
Registered: Nov-04
does anybody know what kind of amp do i need for pioneer sub (450 w max, 150 nom)? does sony XPLOD XM-2100GTX(600 Watts 2 channels max
100 watts RMS x 2 at 4 ohms
125 watts RMS x 2 at 2 ohms
250 watts RMS x 1 at 4 ohms
stereo 2 channel or bridged mono 1 channel output
4-ohm stable in bridged mode
Tri-way capable
MosFET power supply
low-pass crossover
preamp and speaker level inputs
preamp outputs
variable bass boost (0-10 dB) centered at 40 Hz)
go okay with it?

Upload
 

Bronze Member
Username: Otash

Post Number: 12
Registered: Nov-04
and what would be the remote wire from amp be connected to? does my system has an out for it?
« Previous Thread | Next Thread »

Facebook

Shop Related Deals

Directory

Main Forums

Today's Posts

Forum Help

Follow Us