New member
Username: Badgercor Post Number: 2 Registered: Oct-04
Posted on
Monday, October 25, 2004 - 17:50 GMT I am trying to hook up my amp but I need to splice into the factory wiring but I can't find an wiring diagram to see what wires to tap into
Gold Member
Username: Glasswolf NorthWest,
Michigan
USA
Post Number: 5127 Registered: Dec-03
Posted on
Monday, October 25, 2004 - 20:46 GMT factory head unit? what exactly are you trying to find? power goes to the battery ground goes to bare chassis metal if the head unit is aftermarket, RCA lines go to the radio's pre-outs, and remote trigger goes to REM or PWR ANT on the radio
New member
Username: Badgercor Post Number: 4 Registered: Oct-04
Posted on
Tuesday, October 26, 2004 - 02:04 GMT I have the factory (non-fosgate) system, and I am trying to add my MTX amp by using the speaker level type inputs since the factory deck doesn't have RCA outputs, and I cannot find awiring diagram for my truck to know which wires to tap into, I have the loom that goes to the back of the truck open but there is at least 6 different pairs of wires in it on the passenger side. And on the other side there is about 4 wires on the drivers side. Any help would be great
Gold Member
Username: Glasswolf NorthWest,
Michigan
USA
Post Number: 5164 Registered: Dec-03
Posted on
Tuesday, October 26, 2004 - 12:50 GMT just remove the rear speakers and tap into the wiring there.
New member
Username: Badgercor Post Number: 5 Registered: Oct-04
Posted on
Wednesday, October 27, 2004 - 03:17 GMT That was going to be my last resort since I have to pop the whole door panel off to get to it.
Gold Member
Username: Glasswolf NorthWest,
Michigan
USA
Post Number: 5194 Registered: Dec-03
Posted on
Wednesday, October 27, 2004 - 12:02 GMT takes 5 minutes to pull a door panel. ten tops if everything is electric. it's no big deal really. besides, it helps ya learn more about your truck!
New member
Username: Badgercor Post Number: 6 Registered: Oct-04
Posted on
Wednesday, October 27, 2004 - 16:57 GMT Thanks for the help
Silver Member
Username: Pat_l Tucson,
AZ
USA
Post Number: 695 Registered: Apr-04
Posted on
Thursday, October 28, 2004 - 00:04 GMT nice truck!
New member
Username: Devro1835 Post Number: 1 Registered: Nov-04
Posted on
Monday, November 08, 2004 - 04:40 GMT jeff, were you able to figure out the colors of the rear speaker wires i've got a titan and need to do the same thing u are doing. Thanks